STB SYSTEMS, INC.
POWERGRAPH VGA (VER. 2)
Card Type |
Video |
Video Chip Set |
Unidentified |
Highest Resolution Supported |
1024 x 768 |
Maximum Onboard Memory |
1MB DRAM |
Data Bus |
16-bit ISA |
Video Types Supported |
XVGA |
CONNECTIONS |
|||
Function |
Label |
Function |
Label |
15-pin analog video port |
J5 |
DAC chip socket |
U2 |
DAC chip |
U1 |
|
|
Note: Either U1 or U2 should be installed, but not both. |
USER CONFIGURABLE SETTINGS |
|||
Setting |
Label |
Position |
|
Two wait state operation |
J1 |
Pins 2 & 3 closed |
|
|
Zero wait state operation |
J1 |
Pins 1 & 2 closed |
Card does not use IRQ2/9 |
J2 |
Pins 2 & 3 closed |
|
|
Card uses IR/FONT |
J2 |
Pins 1 & 2 closed |
Factory configured - do not alter |
J3 |
Pins 1 & 2 closed |
|
BIOS uses 8-bit I/O |
J5 |
Pins 1 & 2 closed |
|
|
BIOS uses 16-bit I/O |
J5 |
Pins 2 & 3 closed |
DRAM |
Note: This card may take 256KB, 512KB, or 1MB of on-board DRAM. The locations of the banks and the configurations of the chips in these banks is unidentified. |
VERTICAL SCAN RATE |
||
Resolution |
Scan Rate |
J4 |
640 x 480 |
60Hz |
Pins 1 & 2 closed |
800 x 600 |
56Hz |
Pins 1 & 2 closed |
1024 x 768 |
43Hz (interlaced) |
Pins 1 & 2 closed |
640 x 480 |
72Hz |
Pins 2 & 3 closed |
800 x 600 |
72Hz |
Pins 2 & 3 closed |
1024 x 768 |
60Hz |
Pins 2 & 3 closed |