TAN COMPUTER SYSTEM
OKSORI CD-VISION PRO BOARD
Category |
MPEG 1 card |
Video Types Supported |
XVGA |
Video Processor |
Unidenitifed |
Highest Resolution Supported |
640 x 480 |
Data Bus Type |
16-bit ISA |
Memory Type |
N/A |
Maximum Onboard Memory |
N/A |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
15-pin analog video port |
CN1 |
9-pin NTSC Option board connector |
CN7 |
VGA feature connector |
CN2 |
9-pin NTSC Option board connector |
CN8 |
Internal audio out |
CN3 |
4-pin NTSC Option board connector |
CN9 |
*Proprietary serial A/V interface |
CN4 |
External line out |
J1 |
6-pin NTSC Option board connector |
CN5 |
*NTSC out |
J2 |
9-pin NTSC Option board connector |
CN6 |
*NTSC out |
J3 |
*Note: J2 & J3 are only used when the NTSC Option board is connected. CN4 is only used when the CD-Vision Option board is connected. |
DMA CHANNEL SELECTION | |||||
Channel |
JP2/A |
JP2/B |
JP2/C |
JP2/D | |
0 |
Closed |
Closed |
Open |
Open | |
3 |
Open |
Open |
Closed |
Closed |
INTERRUPT SELECTION | ||||
IRQ |
JP2/E |
JP2/F |
JP2/G | |
5 |
Closed |
Open |
Open | |
10 |
Open |
Closed |
Open | |
12 |
Open |
Open |
Closed |
OVERLAY I/O ADDRESS SELECTION | ||
Address |
JPS1 | |
210h |
Open | |
310h |
Closed |
CD VISION I/O ADDRESS SELECTION |
Note: The exact address setting(s) of JPS2 is unidentified by the manufacturer. |
FACTORY CONFIGURED - DO NOT ALTER | |
Jumper |
Position |
J4 |
N/A |