PIXELWORKS, INC.
WHIRLWIN/LITE
Category |
Video |
Video Types Supported |
XVGA |
Video Processor |
S3 86C924 |
Highest Resolution Supported |
1024 x 768 |
Data Bus Type |
16-bit ISA |
Memory Type |
VRAM |
Maximum Onboard Memory |
1024KB |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
15-pin video analog port |
CN1 |
VGA feature connector |
CN2 |
MONITOR TYPE CONFIGURATION | ||||
Type |
Rate |
SW1/1 |
SW1/2 | |
Multisync 48KHz |
60Hz |
On |
Off | |
Multisync 38KHz |
43.5Hz |
Off |
On | |
Multisync 57KHz |
72Hz |
On |
On | |
VGA, Super VGA |
43.5Hz |
Off |
Off |
TURBO MODE CONFIGURATION | ||
Setting |
SW1/3 | |
Disabled |
Off | |
Enabled |
On |
BIOS TYPE SELECTION | ||
Type |
SW1/4 | |
8-bit |
On | |
16-bit |
Off |
ZERO WAIT STATE SELECTION | ||
Setting |
JP3 | |
Disabled |
Pins 2 & 3 closed | |
Enabled |
Pins 1 & 2 closed |
VIDEO INTERRUPT CONFIGURATION | ||
IRQ 2/9 |
JP4 | |
Disabled |
Pins 2 & 3 closed | |
Enabled |
Pins 1 & 2 closed |
MONITOR ID CONFIGURATION | ||
Mode |
JP5 | |
Sense |
Pins 2 & 3 closed | |
MID1 |
Pins 1 & 2 closed | |
Note: In the "Sense" mode the WhirlWin/Lite will automatically detect the monitor being used. In the "MID1 mode, the ID information from the monitor will be read by software which supports this feature. |
FACTORY CONFIGURED - DO NOT ALTER | |
Jumper |
Position |
JP1 |
Pins 2 & 3 closed |
JP2 |
Pins 1 & 2 closed |