ORCHID TECHNOLOGY
PRODESIGNER VGA/PRODESIGNER VGA +
|
Category |
Video |
|
Video Types Supported |
VGA |
|
Video Processor |
Unidentified |
|
Highest Resolution Supported |
640 x 480 |
|
Data Bus Type |
16-bit ISA |
|
Memory Type |
DRAM |
|
Maximum Onboard Memory |
256KB (VGA)/512KB (VGA+) |
|
CONNECTIONS | |
|
Purpose |
Location |
|
15-pin analog video port |
CN1 |
|
NMI SELECT | |
|
Setting |
JP1 |
|
NMI enable |
Closed |
|
NMI disable |
Open |
|
Note:If the Auto detect feature is used (Software) then this jumper must be enabled. On certain Compaq computers this causes a failure during boot up. | |
|
BIOS BUS SELECT | |
|
Setting |
JP2 |
|
8-Bit BIOS |
Pins 1 & 2 closed |
|
16-Bit BIOS |
Pins 2 & 3 closed |
|
Note: Under newer revisions of the card JP2 is not functional. | |