WISECOM, INC.
WS-2814JS6 (INTERNAL)
|
Card Type |
Modem (synchronous/asynchronous) |
|
Chipset |
Sierra |
|
I/O Options |
Voice, microphone in, speaker out |
|
Maximum Data Rate |
28.8Kbps |
|
Maximum Fax Rate |
14.4Kbps |
|
Data Bus |
8/16-bit ISA |
|
Fax Class |
Class I & II |
|
Data Modulation |
Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.32, V.32bis, V.34 |
|
Fax Modulation |
ITU-T V.17, V.21CH2, V.27ter, V.29 |
|
Error Correction/Compression |
MNP5, V.42, V.42bis |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
Telephone line in |
CN1 |
Speaker out |
CN3 |
|
Telephone line out |
CN2 |
Microphone in |
CN4 |
|
INTERRUPT SELECTION | ||||||
|
Setting |
JP6/A |
JP6/B |
JP6/C |
JP6/D |
JP6/E |
JP6/F |
|
í IRQ3 |
Open |
Open |
Open |
Open |
Open |
Closed |
|
IRQ4 |
Open |
Open |
Open |
Open |
Closed |
Open |
|
IRQ5 |
Open |
Open |
Open |
Closed |
Open |
Open |
|
IRQ10 |
Open |
Open |
Closed |
Open |
Open |
Open |
|
IRQ11 |
Open |
Closed |
Open |
Open |
Open |
Open |
|
IRQ12 |
Closed |
Open |
Open |
Open |
Open |
Open |
|
SERIAL PORT ADDRESS SELECTION | ||
|
Setting |
JP6/G |
JP6/H |
|
3F8h (COM1:) |
Open |
Open |
|
2F8h (COM2:) |
Open |
Closed |
|
3E8h (COM3:) |
Closed |
Open |
|
í 2E8h (COM4:) |
Closed |
Closed |
|
SUPPORTED STANDARD COMMANDS |
|
Basic AT Commands |
|
+++, comma, A/ |
|
A, B, D, E, H, L, M, O, P, Q, T, V, X, Y, Z |
|
&C, &D, &F, &M, &S, &T, &V, &W, &Y, &Z |
|
Extended AT Commands |
|
\C, \G, \N, \Q, \V, \X |
|
%A, %C, %D, %Q |
|
S-Registers |
|
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12, S18, S25, S26, S38 |
Note: See MHI documentation for complete information. |
Proprietary AT Command Set
|
AUTO-FALL FORWARD/FALLBACK | |
|
Type: |
Configuration |
|
Format: |
AT [cmds] &An [cmds] |
|
Description: |
Selects whether the modem will automatically fall forward or back in response to line conditions. |
|
Command |
Function |
|
&A0 |
Auto-fall forward/fallback disabled. |
|
&A1 |
Auto-fall forward/fallback enabled. |
|
DISPLAY INFORMATION | |
|
Type: |
Immediate |
|
Format: |
AT [cmds] In [cmds] |
|
Description: |
Displays information requested about the modem. |
|
Command |
Function |
|
I0 |
Reports product identification code. |
|
I1 |
Reports ROM checksum. |
|
I2 |
Tests and reports ROM checksum. |
|
I3 |
Reports firmware revision and model ID. |
|
I4 |
Reports configuration ID. |
|
LOCAL SERIAL PORT SPEED | |
|
Type: |
Configuration |
|
Format: |
AT [cmds] \Tn [cmds] |
|
Description: |
Sets the speed of the local serial port. |
|
Command |
Function |
|
\T0 |
Auto-detect serial port speed. |
|
\T1 |
Use speed of last command. |
|
\T2 |
Set speed to 300bps. |
|
\T3 |
Set speed to 1200bps. |
|
\T4 |
Set speed to 2400bps. |
|
\T5 |
Set speed to 4800bps. |
|
\T6 |
Set speed to 7200bps. |
|
\T7 |
Set speed to 9600bps. |
|
\T8 |
Set speed to 12Kbps. |
|
\T9 |
Set speed to 14.4Kbps. |
|
\T10 |
Set speed to 16.8Kbps. |
|
\T11 |
Set speed to 19.2Kbps. |
|
\T12 |
Set speed to 21.6Kbps. |
|
\T13 |
Set speed to 24Kbps. |
|
\T14 |
Set speed to 26.4Kbps. |
|
\T15 |
Set speed to 28.8Kbps. |
|
\T16 |
Set speed to 38.4Kbps. |
|
\T17 |
Set speed to 57.6Kbps. |
|
\T18 |
Set speed to 76.8Kbps. |
|
\T19 |
Set speed to 115.2Kbps. |
|
\T20 |
Set speed to 128Kbps. |
|
PROTOCOL | |
|
Type: |
Configuration |
|
Format: |
AT [cmds] &Hn [cmds] |
|
Description: |
Selects the modulation protocol that the modem will use. |
|
Command |
Function |
|
&H0 |
Use V.34 with fallback to lower protocols. |
|
&H1 |
Use V.34 only. |
|
&H2 |
Use V.32bis with fallback to lower protocols. |
|
&H3 |
Use V.32bis only. |
|
&H4 |
Use V.32 with fallback to lower protocols. |
|
&H5 |
Use V.32 only. |
|
&H6 |
Use V.22bis only. |
|
&H7 |
Use V.22 only. |
|
&H8 |
Use Bell 212A only. |
|
&H9 |
Use Bell 103A only. |
|
&H10 |
Use V.21 only. |
|
TRELLIS CODING | ||
|
Type: |
Configuration | |
|
Format: |
AT [cmds] &Un [cmds] | |
|
Description: |
Selects whether the modem will use trellis coding. | |
|
Command |
Function | |
|
í &U0 |
Trellis coding enabled. | |
|
&U1 |
Trellis coding disabled. | |