IPTools.net.ua

Card Type

Modem (asynchronous), Token Ring

Chipset

Texas Instruments TMS380C25

Maximum Onboard Memory

160KB DRAM/128KB PROM

Network Transfer Rate

4/16Mbps

Maximum Data Rate

14.4Kbps

Maximum Fax Rate

14.4Kbps

Data Bus

PCMCIA Type II

Fax Class

Class I & II

Data Modulation

ITU-T V.21, V.22, V.23, V.22bis, V.32, V.32bis

Fax Modulation

Unidentified

Error Correction/Compression

MNP5, MNP10, V.42, V.42bis

Topology

Token Ring

Wire Type

Shielded/Unshielded twisted pair

Boot ROM

Not available

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, A/

A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z

&C, &D, &F, &G, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z

Extended AT Commands

\A, \B, \G, \J, \K, \L, \N, \W

%C, %L, %Q

Special AT Commands

-K, -Q, *H, )M, @M, :E, +MS

S-Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12, S14, S16, S18, S21, S22, S23, S24, S25, S27,

S28, S29, S30, S31, S32, S33, S36, S37, S38, S39, S40, S41, S46, S48, S82, S86, S91, S92, S95,

S99, S201

CALLBACK NUMBER

Type:

Configuration

Format:

AT [cmds] *Pn:xxxx:<#>

Description:

Sets callback number at location n with the password xxxx.

COMMAND SET

Type:

Immediate

Format:

AT [cmds] S80=n [cmds]

Description:

Selects the active command set.

Command

Function

S80=0

Switch to AT command set.

S80=33

Switch to V.25bis command set.

DISPLAY CALLBACK NUMBERS

Type:

Immediate

Format:

AT [cmds] *L [cmds]

Description:

Displays the list of all callback numbers.

END REMOTE CONFIGURATION

Type:

Immediate

Format:

AT [cmds] *E [cmds]

Description:

Ends the remote configuration session currently in progress.

PROTOCOL/SPEED

Type:

Configuration

Format:

AT [cmds] Fn [cmds]

Description:

Selects the protocol and speed the modem will attempt to connect at.

Command

Function

F0

Auto-detect the highest common connect speed.

F1

Select V.21 or Bell 103 at 300bps speed.

F3

Select V.23 at 75/1200bps speed.

F4

Select V.22 or Bell 212A at 1200bps speed.

F5

Select V.22bis at 2400bps speed.

F6

Select V.32/V.32bis at 4800bps speed.

F7

Select V.32bis at 7200bps speed.

F8

Select V.32/V.32bis at 9600bps speed.

F9

Select V.32bis at 12Kbps speed.

F10

Select V.32bis at 14.4Kbps speed

REMOTE ESCAPE CHARACTER

Type:

Register

Format

AT [cmds] S202=n [cmds]

Default:

Unidentified

Range:

Unidentified

Unit:

1 ASCII character

Description:

Selects a character to be used for escape sequences during remote configuration sessions.

REQUEST REMOTE CONFIGURATION

Type:

Immediate

Format:

AT [cmds] *R [cmds]

Description:

Requests a remote configuration session with the remote modem.

CALL REQUESTED NUMBER WITH IDENTIFICATION

Type:

Immediate

Format:

CRI<#>

Description:

Dials the number given. If supported, the modem�s identification string will be sent with the number.

EXECUTE AT COMMAND

Type:

Immediate

Format:

CNL[AT cmds]

Description:

Executes an AT command string.

IDENTIFICATION STRING

Type:

Configuration

Format:

AT [cmds] PRIxxxx [cmds]

Description:

Sets the modem�s identification string to xxxx.