TELEBIT CORPORATION
T1000PC
|
Card Type |
Modem (synchronous/asynchronous) |
|
Processor |
Motorola 68000 |
|
Processor Speed |
Unidentified |
|
Chipset |
Unidentified |
|
Maximum Data Rate |
9600bps |
|
Data Bus |
8-bit ISA |
|
Data Modulation |
Bell 103A/212A ITU-T V.22, V.22bis Telebit PEP |
|
Error Correction/Compression |
MNP5 |
|
CONNECTIONS | ||||||
|
Function |
Label |
Function |
Label | |||
|
Line in |
CN1 |
Line out |
CN2 | |||
|
USER CONFIGURABLE SETTINGS | ||
|
Setting |
Label |
Position |
|
í Factory configured - do not alter |
JP1 |
Unidentified |
|
í Factory configured - do not alter |
E25 |
Unidentified |
|
SERIAL PORT CONFIGURATION | ||||
|
Address |
IRQ |
E22 |
E23 |
E24 |
|
3F8h (COM1:) |
IRQ4 |
Pins 1 & 2 closed |
Pins 1 & 2 closed |
Pins 2 & 3 closed |
|
2F8h (COM2:) |
IRQ3 |
Pins 2 & 3 closed |
Pins 1 & 2 closed |
Pins 1 & 2 closed |
|
3E8h (COM3:) |
IRQ4 |
Pins 1 & 2 closed |
Pins 2 & 3 closed |
Pins 2 & 3 closed |
|
2E8h (COM4:) |
IRQ3 |
Pins 2 & 3 closed |
Pins 2 & 3 closed |
Pins 1 & 2 closed |
|
TRANSMISSION LEVEL SELECTION | |
|
Setting |
R5 |
|
0 dBm |
4.32K ohm |
|
-1.5 dBm |
5.11K ohm |
|
-3 dBm |
6.04K ohm |
|
-4.5 dBm |
7.15K ohm |
|
-6 dBm |
8.66K ohm |
|
-7.5 dBm |
10.2K ohm |
|
-9 dBm |
12.1K ohm |
|
-10.5 dBm |
14.3K ohm |
|
-12 dBm |
16.9K ohm |
|
-13.5 dBm |
20.5K ohm |
|
-15 dBm |
24.3K ohm |
Note: R5 is a plug-in resistor that can be used to change the transmitted power level. | |
|
SUPPORTED STANDARD COMMANDS |
|
Basic AT Commands |
|
+++, comma, A/ |
|
A, C, E, F, H, M, O, V, X, Z |
|
&F, &T |
|
S-Registers |
|
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12 |
Note: See MHI documentation for complete information. |
Proprietary AT Command Set
See TELEBIT CORPORATION TRAILBLAZER PLUS PC for a full command summary.