TRENDWARE INTERNATIONAL, INC
TFM-288T PCMCIA (LM28 SERIES)
|
Card Type |
Fax, Modem (asynchronous), Network Interface Card |
|
NIC Type |
Ethernet |
|
Network Transfer Rate |
10Mbps |
|
Maximum Modem Rate |
28.8Kbps |
|
Maximum Fax Rate |
14.4Kbps |
|
Data Bus |
PCMCIA Type II |
|
Fax Class |
Class I |
|
Data Modulation Protocol |
Bell103/212A ITU-T V.21, V.22, V.22bis, V.32, V.32bis, V.34 |
|
Fax Modulation Protocol |
ITU-T V.17, V.21CH2, V.27ter, V.29 |
|
Error Correction/Compression |
MNP5, V.42, V.42bis |
|
Topology |
Linear Bus, Star |
|
Wiring Type |
Unshielded twisted pair RG-58A/U 50ohm coaxial |
|
I/O Options |
Ethernet 10BASE-T connector, Ethernet 10BASE-2 connector |
|
Boot ROM |
Not available |
52682
|
SUPPORTED COMMAND SET |
|
Basic AT Commands |
|
AT, +++, Comma, A/ |
|
A, C, D, E, H, M, N, P, Q, T, V, W, X, Z |
|
&C, &D, &F, &G, &K, &R, &S, &T, &V, &W, &X, &Y, &Z |
|
Extended AT Commands |
|
\A, \C, \G, \J, \X, %A, %C |
|
S Registers |
|
S0, S1, S2, S3, S4, S5, S6, S8, S9, S10, S11, S12, S18, S25, S26, S37 |
|
Note: See MHI Help file for full command documentation. |
Proprietary AT Command Set
|
JACK TYPE | |
|
Type: |
Configuration |
|
Format: |
AT [cmds] &Jn [cmds] |
|
Description: |
Selects jack type |
|
Command |
Jack Type |
|
í &J0 |
RJ-11, RJ-41S, RJ45S |
|
&J1 |
RJ-12, RJ-13 |
See TRENDWARE INTERNATIONAL, INC, TFM-288P; document for remaining proprietary command summary.