PROMPTUS COMMUNICATIONS, INC.
OASIS 200T (REV. 1.0)
Card Type |
Switched Bandwidth Controller, Fractional T1/PRI |
Chip Set |
Unidentified |
I/O Options |
Power, 37-pin DTE ports (2), 25-pin serial ports (2), T1 network interface via RJ-48 (2), modem port via RJ-11, terminal port via RJ-11 |
T1 Data Rate |
1.544Mbps |
Line Coding |
AMI, AMI/ZCS, B8ZS |
Framing |
D4, ESF |
Data Bus |
External |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
AC power |
CN1 |
T1 network port 1 (RJ-48) |
CN6 |
37-pin DTE port 1 |
CN2 |
T1 network port 2 (RJ-48) |
CN7 |
37-pin DTE port 2 |
CN3 |
Modem interface (RJ-11) |
CN8 |
25-pin serial port 1 |
CN4 |
VT 100 terminal interface (RJ-11) |
CN9 |
25-pin serial port 1 |
CN5 |
Power switch |
SW1 |
DATA PORT 1 INTERFACE SELECTION | |||
Setting |
JP1/A |
JP1/B | |
V.35 interface enabled |
Closed |
Open | |
RS-422 interface enabled |
Open |
Closed |
DATA PORT 2 INTERFACE SELECTION | |||
Setting |
JP2/A |
JP2/B | |
V.35 interface enabled |
Closed |
Open | |
RS-422 interface enabled |
Open |
Closed |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
SYNC1 |
Green |
On |
Layer 1 active on network line 1 |
SYNC1 |
Green |
Blinking |
Layer 2 active on network line 1 |
SYNC1 |
Green |
Off |
Layer 1 deactivated on network line 1 |
SYNC2 |
Green |
On |
Layer 1 active on network line 2 |
SYNC2 |
Green |
Blinking |
Layer 2 active on network line 2 |
SYNC2 |
Green |
Off |
Layer 1 deactivated on network line 2 |
ALM1 |
Red |
On |
A valid signal has not been detected for 3 seconds, or a link has just been reestablished (10 sec) on network line 1 |
ALM1 |
Yellow |
On |
Out of frame (OOF) error detected on network line 1 |
ALM1 |
N/A |
Off |
No errors detected on network line 1 |
ALM2 |
Red |
On |
A valid signal has not been detected for 3 seconds, or a link has just been reestablished (10 sec) on network line 2 |
ALM2 |
Yellow |
On |
Out of frame (OOF) error detected on network line 2 |
ALM2 |
N/A |
Off |
No errors detected on network line 2 |
STS |
Green |
On |
Power is on |
STS |
Green |
Off |
Power is off; unit failed to properly initialize |