PATTON ELECTRONICS COMPANY
2710
|
Card Type |
T1 CSU/DSU |
|
Chip Set |
Unidentified |
|
I/O Options |
V.35 DTE/DCE port, power, network interface via RJ-48 |
|
T1 Transfer Rate |
1.544Mbps |
|
T1 Protocol |
AMI, B8ZS |
|
Frame type |
D4, ESF |
|
Data Bus |
External |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
V.35 DTE/DCE serial port (34-pin male connector) |
CN1 |
DC power |
CN3 |
|
Network interface via RJ-48 connector |
CN2 | ||
|
USER CONFIGURABLE SETTINGS | |||
|
Setting |
Label |
Position | |
|
ESF/B8ZS framing and coding enabled |
SW1/4 |
Off | |
|
D4/AMI framing and coding enabled |
SW1/4 |
On | |
|
64Kbps DSO rate |
SW1/5 |
On | |
|
56Kbps DSO rate |
SW1/5 |
Off | |
|
Transmit clock derived from receive line signal |
SW1/6 |
Off | |
|
Transmit clock generated internally |
SW1/6 |
On | |
|
Power supplied via DC power jack |
JP1 |
Pins 2 & 4 closed | |
|
Power supplied to pin KK on V.35 connector |
JP1 |
Pins 1 & 2 closed | |
|
DATA RATE | |||||
|
n x56 |
n x64 |
SW1/1 |
SW1/2 |
SW1/3 | |
|
Clear channel (unframed) |
Off |
Off |
Off | ||
|
112Kbps |
128Kbps |
On |
Off |
Off | |
|
224Kbps |
256Kbps |
Off |
On |
Off | |
|
336Kbps |
384Kbps |
On |
On |
Off | |
|
448Kbps |
512Kbps |
Off |
Off |
On | |
|
672Kbps |
768Kbps |
On |
Off |
On | |
|
896Kbps |
1.024Mbps |
Off |
On |
On | |
|
1.344Mbps |
1.536Mbps |
On |
On |
On | |
|
LINE BUILD | |||
|
Net build |
SW1/7 |
SW1/8 | |
|
0dB |
Off |
Off | |
|
-7.5dB |
On |
Off | |
|
-15dB |
Off |
On | |
|
-22.5dB |
On |
On | |
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
TXD |
Green |
On |
DTE is transmitting data to CSU/DSU |
|
TXD |
Green |
Off |
DTE is not transmitting data to CSU/DSU |
|
RXD |
Green |
On |
DTE is receiving data from CSU/DSU |
|
RXD |
Green |
Off |
DTE is not receiving data from CSU/DSU |
|
LOS |
Red |
On |
Loss of signal or loss of frame condition detected on network |
|
LOS |
Red |
Off |
Loss of signal or loss of frame condition not detected on network |
|
ALM |
Red |
On |
Alarm condition detected on network |
|
ALM |
Red |
Off |
Alarm condition not detected on network |
|
ERR |
Red |
On |
Error second (ES) detected on received configuration information |
|
ERR |
Red |
Off |
Error second (ES) not detected on received configuration information |
|
TST |
Yellow |
On |
Device is conducting a loopback test |
|
TST |
Yellow |
Off |
Device is not conducting a loopback test |
|
PWR |
Green |
On |
Power is on |
|
PWR |
Green |
Off |
Power is off |