PRACTICAL PERIPHERALS, INC.
PC288T2/PC288T2-EZ/MC288T2/MC288T2-EZ
|
Modem Type |
Data (synchronous/asynchronous)/Fax/Voice |
|
Maximum Data Rate |
28.8Kbps |
|
Maximum Fax Rate |
14.4Kbps |
|
Data Bus |
External |
|
Fax Class |
Class I & II |
|
Data Modulation Protocol |
Bell 103A/212A CCITT V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell V.FC |
|
Fax Modulation Protocol |
V.17, CCITT V.21CH2, V.27ter, V.29 |
|
Error Correction/Compression |
MNP2-5, V.42, V.42bis |
|
CONNECTIONS | |
|
Purpose |
Location |
|
Line out |
CN1 |
Proprietary Command Set
|
CALLER ID | |
|
Type: |
Configuration |
|
Format: |
AT [cmds] %CCID=n [cmds] |
|
Example: |
AT %CCID2 <CR> |
|
Description: |
Controls the Caller ID function. |
| Command |
Function |
| %CCID=0 |
Caller ID disabled. |
| %CCID=1 |
Caller ID displays formatted data. |
| %CCID=2 |
Caller ID displays raw hexadecimal data. |
|
CLOCK DOUBLER | |
|
Type: |
Configuration |
|
Format: |
AT [cmds] %BAUD=n [cmds] |
|
Example: |
AT %BAUD1 <CR> |
|
Description: |
Doubles the local serial port speed. |
| Command |
Function |
| %BAUD=0 |
Clock doubler disabled. |
| %BAUD=1 |
Clock doubler enabled. |
|
DISTINCTIVE RING | |||
|
Format |
AT [cmds] S101=n [cmds] | ||
|
Example: |
ATS101=40 <CR> | ||
|
Default: |
0 | ||
|
Range: |
0 - 255 | ||
|
Unit: |
Bit-mapped | ||
|
Description: | |||
|
Bit | Value |
Function | |
|
0 | 0 1 |
Do not respond to ring type A. Respond to ring type A. | |
|
1 | 0 |
Not used. | |
|
2 | 0 1 |
Do not respond to ring type C. Respond to ring type C. | |
|
3 | 0 1 |
Do not respond to ring type D. Respond to ring type D. | |
|
4 | 0 1 |
Do not respond to ring type E. Respond to ring type E. | |
|
5 | 0 |
Not used. | |
|
6 | 0 1 |
Do not respond to ring type G. Respond to ring type G. | |
|
7 | 0 1 |
Report RING for all ring types. Report RING n where n is the ring type. | |