MULTIWAVE INNOVATION, INC
COMMWAVE V.34 28.8KBPS
Card Type |
Modem |
Chipset |
NSP |
Maximum Modem Rate |
28.8Kbps |
Maximum Fax Rate |
14.4Kbps |
Fax Class |
Class I & II |
Modem Modulation Protocol |
Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 |
Fax Modulation Protocol |
ITU-T V.17, V.21 CH2, V.27ter, V.29 |
Error Correction/Compression |
MNP5, V.42, V.42bis |
Data Bus |
8-bit ISA |
CONNECTIONS | ||||||
Function |
Label |
Function |
Label | |||
Line out |
CN1 |
Line in |
CN2 |
SUPPORTED COMMAND SET |
Basic AT Commands |
AT, A/ |
A, E, H, L, M, O, P, Q, T, V, W, X, Y, Z |
&C, &F, &G, &W, &X, &Y, &Z |
Extended AT Commands |
\A, \B, \G, \K, \L, \N |
%C, %L, %Q |
S Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25, S30, S32, S33, S38, S91 |
Special Commands |
#CID |
Voice Commands |
#BDR, #MDL?, #MFR?, #REV?, #SPK, #TL, #VBQ?, #VBT, #VCI?, #VLS, #VRA, #VRN, #VRX |
#VSD, #VSK, #VSP, #VSS, #VTD, #VTS, #VTX |
Note: See MHI Help File for full command documentation. |
Proprietary AT Command Set
For a full command summary, see
MULTIWAVE INNOVATION, INC. COMMWAVE V.34 PLUG & PLAY (VER.1.0)