MAGICXPRESS
MX56X - R
Card Type |
Modem/Fax card |
Chip Set |
Unidentified |
I/O Options |
Line out, phone in, serial port, power jack |
Maximum Modem Rate |
33.6Kbps |
Maximum Fax Rate |
14.4Kbps |
Data Modulation Protocol |
Bell 103A/212A ITU-T V34, V.32bis, V.32, V.22bis, V.23, V.22, V.21 |
Fax Modulation Protocol |
ITU-T V.17, V.27ter, V.29, T.4, T.30 |
Error Correction/Compression |
MNP5, V.42, V.42bis |
Fax Class |
Class I & II |
Data Bus |
External |
CONNECTIONS | ||||||
Function |
Label |
Function |
Label | |||
Line out |
CN1 |
Serial port |
CN3 | |||
Phone in |
CN2 |
Power jack |
CN4 |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
PWR |
Unidentified |
On |
Power is on |
PWR |
Unidentified |
Off |
Power is off |
AA | Unidentified |
On |
Auto-answer mode enabled |
AA |
Unidentified |
Off |
Auto-answer mode disabled |
TR |
Unidentified |
On |
DTR signal is high |
TR |
Unidentified |
Off |
DTR signal is low |
RD |
Unidentified |
Blinking |
Modem is receiving data |
RD |
Unidentified |
Off |
Modem is not receiving data |
SD |
Unidentified |
Blinking |
Modem transmitting data |
SD |
Unidentified |
Off |
Modem not transmitting data |
OH |
Unidentified |
On |
Modem is Off-hook |
OH |
Unidentified |
Off |
Modem is on-hook |
CD |
Unidentified |
On |
Carrier signal detected |
CD |
Unidentified |
Off |
Carrier signal not detected |
HS | Unidentified |
On |
Modem is operating at 24Kbps or higher |
HS |
Unidentified |
Off |
Modem is operating at 24Kbps or higher |
MR |
Unidentified |
On |
Modem is receiving power |
MR |
Unidentified |
Blinking |
Modem is in self-test mode |
SUPPORTED COMMAND SET |
Basic AT Commands |
AT, +++, A/ |
A, B, C, E, H, M, O, P, Q, T, V, X, Y, Z |
&C, &D, &P, &V, &W, &Y, &Z |
Extended AT Commands |
\A, \B, \G |
%C, %L, %Q |
Special Commands |
+MS |
S Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S18, S21, ,S24, S25,S26 |
S29, S30, S31, S32, S33, S38, S91, S92, S95 |
Note: See MHI Help File for full command documentation. |
Proprietary AT Command Set
For a full command summary, see MAGICXPRESS MX56V - R.