MAXTECH CORPORATION
XPVS336I
|
Card Type |
Modem (asynchronous) |
|
Chipset |
Unidentified |
|
I/O Options |
Voice, speakerphone, microphone in, speaker out |
|
Maximum Data Rate |
33.6Kbps |
|
Maximum Fax Rate |
14.4Kbps |
|
Data Modulation |
Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 |
|
Fax Modulation |
ITU-T V.17, V.21CH2, V.27ter, V.29 |
|
Error Correction/Compression |
MNP5, V.42, V.42bis |
|
Fax Class |
Class I & II |
|
Data Bus |
8-bit ISA |
|
Card Size |
Full height, one-third length |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
Telephone line out |
CN1 |
Microphone in or speaker out |
CN3 |
|
Telephone line in |
CN2 |
Microphone in or speaker out |
CN4 |
Note: It is not known which of CN3 and CN4 is the microphone in jack and which is the speaker out jack. | |||
|
USER CONFIGURABLE SETTINGS | ||
|
Setting |
Label |
Position |
|
í Plug-N-Play disabled |
JP1/C |
Closed |
|
Plug-N-Play enabled |
JP1/C |
Open |
|
Speakers attached to CN4 are stereo |
JP5 |
Closed |
|
Speakers attached to CN4 are mono |
JP5 |
Open |
Note: When JP1/C is set for Plug-N-Play mode, all other applicable settings must also be set for Plug-N-Play mode. | ||
|
SERIAL PORT ADDRESS SELECTION | ||
|
Setting |
JP1/A |
JP1/B |
|
3F8h (COM1:) |
Closed |
Closed |
|
í 2E8h (COM2:) |
Open |
Closed |
|
3F8h (COM3:) |
Closed |
Open |
|
2E8h (COM4:) |
Open |
Open |
|
Plug-N-Play |
Open |
Open |
|
INTERRUPT SELECTION | |||||
|
Setting |
JP2/A |
JP2/B |
JP2/C |
JP2/D |
JP2/E |
|
2 |
Closed |
Open |
Open |
Open |
Open |
|
í 3 |
Open |
Closed |
Open |
Open |
Open |
|
4 |
Open |
Open |
Closed |
Open |
Open |
|
5 |
Open |
Open |
Open |
Closed |
Open |
|
7 |
Open |
Open |
Open |
Open |
Closed |
|
Plug-N-Play |
Open |
Open |
Open |
Open |
Open |
|
SUPPORTED STANDARD COMMANDS |
|
Basic AT Commands |
|
+++, comma, A/ |
|
A, B, E, F, H, L, M, O, P, T, V, X, Z |
|
&C, &D, &F, &G, &P, &R, &S, &T, &W |
|
S-Registers |
|
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25 |
Note: See MHI help file for complete information. |
|
UNIDENTIFIED COMMANDS | |
|
Command |
Default |
|
S13 |
0 |
|
S15 |
0 |
|
S16 |
0 |
|
S27 |
0 |
|
S32 |
0 |
|
S33 |
0 |
|
S34 |
0 |
Proprietary AT Command Set
See MAXTECH CORPORATION XVPS56I for a full command summary.