MOTOROLA, INC.
VOICESURFR 56K (EXTERNAL)
Card Type |
Modem (asynchronous) |
Chip Set |
Rockwell |
I/O Options |
Voice, speakerphone, microphone in, speaker out |
Maximum Modem Rate |
56Kbps |
Maximum Fax Rate |
14.4Kbps |
Data Modulation Protocol |
Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell V.FC, K56+ |
Fax Modulation Protocol |
ITU-T V.17, V.21CH2, V.27ter, V.29 |
Error Correction/Compression |
MNP5, V.42, V.42bis |
Fax Class |
Class I |
Data Bus |
Serial |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
DC power in |
CN1 |
Speaker out |
CN4 |
Serial port |
CN2 |
Telephone line in |
CN5 |
Microphone in |
CN3 |
Telephone line out |
CN6 |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
TR |
Red |
On |
DTR signal is high |
TR |
Red |
Off |
DTR signal is low |
CD |
Red |
On |
Carrier signal detected |
CD |
Red |
Off |
Carrier signal not detected |
RD |
Red |
On |
Modem is receiving data |
RD |
Red |
Off |
Modem is not receiving data |
SD |
Red |
On |
Modem is transmitting data |
SD |
Red |
Off |
Modem is not transmitting data |
OH |
Red |
On |
Modem is off-hook |
OH |
Red |
Off |
Modem is on-hook |
RI |
Red |
On |
Power is on |
RI |
Red |
Blinking |
Phone is ringing |
RI |
Red |
Off |
Power is off |
SUPPORTED STANDARD COMMANDS |
Basic AT Commands |
+++, comma, A/ |
A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z |
&C, &D, &F, &G, &K, &P, &R, &S, &T, &V, &W, &Y, &Z |
Extended AT Commands |
\A, \B, \K, \N, \V |
%C, %E, %L, %Q |
Special AT Commands |
#CID, +MS |
S-Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S24, S25 |
S26, S27, S28, S29, S30, S32, S33, S36, S38, S39, S40, S46, S48, S82, S86, S91, S92, S95 |
Note: See MHI help file for complete information. |
UNIDENTIFIED COMMANDS | |
Command |
Default |
+ES=nnn |
3,0,2 |
+ESA=nnnnnnnn |
0,0,0,0,0,0,0,0 |
+ITF=nn |
255,64 |
Proprietary AT Command Set
See MOTOROLA, INC. VOICESURFR 56K (INTERNAL) for a full command summary.