MOTOROLA, INC.
FM96
|
Card Type |
Wireless modem (synchronous/asynchronous) |
|
Chip Set |
Unidentified |
|
Maximum Data Rate |
9600bps |
|
Data Bus |
External |
|
Data Modulation Protocol |
Unidentified |
|
CONNECTIONS | ||||||
|
Function |
Label |
Function |
Label | |||
|
RS-232/422 |
CN1 |
DC power |
CN3 | |||
|
450MHz antenna connector |
CN2 | |||||
|
USER CONFIGURABLE SETTINGS | ||
|
Setting |
Label |
Position |
|
Transmitter can only be activated on low DCD |
JP1 |
Pins 2 & 3 closed |
|
Transmitter can be activated regardless of DCD |
JP1 |
Pins 1 & 2 closed |
|
Asynchronous mode |
S1/1 |
Off |
|
Synchronous mode |
S1/1 |
On |
|
Factory configured - do not alter |
S1/2 |
On |
|
Factory configured - do not alter |
S1/3 |
On |
|
10mS delay from RTS to CTS |
S1/4 |
Off |
|
25mS delay from RTS to CTS |
S1/4 |
On |
|
Carrier monitor disabled |
S1/5 |
Off |
|
Carrier monitor enabled |
S1/5 |
On |
|
Anti-streaming enabled |
S1/6 |
Off |
|
Anti-streaming disabled |
S1/6 |
On |
|
Factory configured - do not alter |
S1/7 |
On |
|
Use channel A |
S1/8 |
Off |
|
Use channel B |
S1/8 |
On |
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
TD |
Red |
On |
Modem is transmitting data |
|
TD |
Red |
Off |
Modem is not transmitting data |
|
RD |
Green |
On |
Modem is receiving data |
|
RD |
Green |
Off |
Modem is not receiving data |
Note: The locations of individual LEDs are unidentified. | |||