LOGICODE TECHNOLOGY, INC.
9600 FAX EXTERNAL
|
Card Type |
Modem (asynchronous) |
|
Chipset |
Unidentified |
|
Maximum Data Rate |
9600bps |
|
Maximum Fax Rate |
9600bps |
|
Data Modulation |
Bell 103A, 212A ITU-T V.21, V.22, V.22bis, V.32 |
|
Fax Modulation |
ITU-T V.21CH2, V.27ter, V.29 |
|
Error Correction/Compression |
MNP5, V.42, V.42bis |
|
Fax Class |
Class I & II |
|
Data Bus |
Serial |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
Telephone line in |
CN1 |
Serial port |
CN3 |
|
Telephone line out |
CN2 |
DC power in |
CN4 |
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
HS |
Green |
On |
Modem is operating at 4800bps or faster |
|
HS |
Green |
Off |
Modem is operating at slower than 4800bps |
|
AA |
Green |
On |
Auto-answer enabled |
|
AA |
Green |
Off |
Auto-answer disabled |
|
AA |
Green |
Blinking |
Phone is ringing |
|
CD |
Green |
On |
Carrier signal detected |
|
CD |
Green |
Off |
Carrier signal not detected |
|
OH |
Green |
On |
Modem is off-hook |
|
OH |
Green |
Off |
Modem is on-hook |
|
RD |
Green |
Blinking |
Modem is receiving data |
|
RD |
Green |
Off |
Modem is not receiving data |
|
SD |
Green |
Blinking |
Modem is transmitting data |
|
SD |
Green |
Off |
Modem is not transmitting data |
|
TR |
Green |
On |
DTR signal is high |
|
TR |
Green |
Off |
DTR signal is low |
|
MR |
Green |
On |
Power is on |
|
MR |
Green |
Off |
Power is off |
|
SUPPORTED STANDARD COMMANDS |
|
Basic AT Commands |
|
+++, comma, A/ |
|
A, C, D, E, F, H, L, M, N, P, Q, T, V, W, X, Y, Z |
|
&C, &D, &F, &G, &K, &L, &P, &R, &S, &T, &V, &W, &Y, &Z |
|
Extended AT Commands |
|
\A, \B, \C, \G, \J, \N, \O, \Q, \T, \U, \V, \X, \Y, \Z |
|
%A, %C, %E, %G |
|
Special AT Commands |
|
-C, -J, "H, "O |
|
S-Registers |
|
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S25, S26 |
|
S27, S30, S37, S95 |
Note: See MHI help file for complete information. |
Proprietary AT Command Set
See LOGICODE TECHNOLOGY, INC. 9600 EXTERNAL for a full command summary.