IML, INC.
ARTEMUX-25 SCSA
|
Card Type |
Telephony/Network |
|
NIC Type |
ATM |
|
I/O Options |
MVIP bus |
|
Network Transfer Rate |
Unidentified |
|
Data Bus |
32-bit PCI |
|
Topology |
Star |
|
Wire Type |
Unshielded twisted pair |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
Line 1 out |
CN1 |
ATM connector |
CN3 |
|
Line 2 out |
CN2 |
DC power in |
JP3 |
|
Note:This card requires an external DC power supply to be connected to JP3. For more information, contact the manufacturer. | |||
|
USER CONFIGURABLE SETTINGS | |||
|
Setting |
Label |
Position | |
|
Line 1 audio output fed through to audio input |
JP4 |
Closed | |
|
Line 1 audio output not fed through to audio input |
JP4 |
Open | |
|
Line 2 audio output fed through to audio input |
JP5 |
Closed | |
|
Line 2 audio output not fed through to audio input |
JP5 |
Open | |
|
Factory configured - do not alter |
JP6 |
Pins 1 & 2 closed | |
|
Factory configured - do not alter |
JP10 |
Pins 2 & 3 closed | |
|
LINE 1 CONFIGURATION | ||
|
Setting |
JP1 |
JP7 |
|
Subscriber Line Interface Circuit |
Pins 5 & 6, 7 & 8 closed |
Pins 3 & 5, 4 & 6 closed |
|
Telephone handset |
Pins 1 & 2, 3 & 5, 7 & 9, 11 & 12 closed |
Pins 1 & 3, 2 & 4 closed |
|
LINE 2 CONFIGURATION | ||
|
Setting |
JP2 |
JP8 |
|
Central Office Interface Circuit |
Pins 5 & 6, 7 & 8 closed |
Pins 3 & 5, 4 & 6 closed |
|
Telephone handset |
Pins 1 & 2, 3 & 5, 7 & 9, 11 & 12 closed |
Pins 1 & 3, 2 & 4 closed |
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
LED1 |
Green |
On |
ATM is transmitting a cell |
|
LED1 |
Green |
Off |
ATM is not transmitting a cell |
|
LED2 |
Green |
On |
ATM is receiving a cell |
|
LED2 |
Green |
Off |
ATM is not receiving a cell |
|
LED3 |
Red |
On |
On-board CPU halted |
|
LED3 |
Red |
Off |
On-board CPU operation normal |
|
Note:The exact location of LED3 is unidentified. However, it is in the vicinity of its location on the diagram. | |||