LANTECH COMPUTER COMPANY
MULTI-FUNCTION 28.8KBPS PCMCIA LAN + FAX/MODEM
|
Card Type |
Fax, Modem (asynchronous), Network Interface Card |
|
Chip Set |
Unidentified |
|
I/O Options |
Ethernet 10BaseT connector |
|
NIC Type |
Ethernet |
|
Network Transfer Rate |
10Mbps |
|
Maximum Modem Rate |
28.8Kbps |
|
Maximum Fax Rate |
14.4Kbps |
|
Data Bus |
PCMCIA Type II |
|
Fax Class |
Class I & II |
|
Data Modulation Protocol |
Bell 103, Bell 212A/B ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 |
|
Fax Modulation Protocol |
ITU-T V.17, V.21CH2, V.27ter, V.29 |
|
Error Correction/Compression |
MNP5, V.42, V.42bis |
|
Topology |
Star |
|
Wiring Type |
Unshielded twisted pair |
|
Boot ROM |
Not available |
V2325
|
SUPPORTED COMMAND SET |
|
Basic AT Commands |
|
AT, Comma, A/ |
|
A, B, C, D, E, H, M, N, O, P, Q, S, T, V, X, Y, Z |
|
&C, &D, &F, &G, &P, &S, &T, &V, &W |
|
Extended AT Commands |
|
\K, \N, %E, %Q |
|
S Registers |
|
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S25, S26, S29, S30, S32 |
|
S33, S37, S38 |
|
Note: See MHI Help file for full command documentation. |
Proprietary AT Command Set
|
MODULATION SELECTION | ||
|
Type: |
Configuration | |
|
Format: |
AT [cmds] Fn [cmds] | |
|
Description: |
Controls which modulation the modem uses to connect with | |
|
Command |
Function | |
|
F0 |
Auto-detect mode, same as ATN1 | |
|
REPORT INFORMATION | |
|
Type: |
Immediate |
|
Format: |
AT [cmds] In [cmds] |
|
Description: |
Displays information requested |
|
Command |
Function |
|
I0 |
Reports product code |
|
SLEEP TIMER | |
|
Type: |
Register |
|
Format |
AT [cmds] S24=n [cmds] |
|
Default: |
Unidentified |
|
Range: |
0-255 |
|
Unit: |
1 second |
|
Description: |
Maximum duration of DTE and DCE inactivity allowed prior to initiating low-power sleep mode. |