GLOBAL VILLAGE COMMUNICATIONS
TELEPORT 33.6 SPEAKERPHONE
|
Card Type |
Modem (synchronous/asynchronous) |
|
Chipset |
Unidentified |
|
I/O Options |
Microphone in, speaker out, voice, speakerphone |
|
Maximum Data Rate |
33.6Kbps |
|
Maximum Fax Rate |
14.4Kbps |
|
Data Modulation |
Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell K56+ |
|
Fax Modulation |
ITU-T V.17, V.29 |
|
Error Correction/Compression |
MNP5, V.42, V.42bis |
|
Fax Class |
Class I |
|
Data Bus |
Serial |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
Speakerphone button |
BT1 |
DC power in |
CN5 |
|
Mute button |
BT2 |
Serial port |
CN6 |
|
Speaker out |
CN1 |
Microphone |
MIC |
|
Microphone in |
CN2 |
Volume control |
R1 |
|
Telephone line out |
CN3 |
Power switch |
SW1 |
|
Telephone line in |
CN4 | ||
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
LED1 |
Unidentified |
On |
Modem is in speakerphone mode |
|
LED1 |
Unidentified |
Off |
Modem is not in speakerphone mode |
|
LED2 |
Unidentified |
On |
Microphone is muted |
|
LED2 |
Unidentified |
Blinking |
Voice messages are waiting |
|
LED2 |
Unidentified |
Off |
Microphone is not muted and no messages are waiting |
|
LED3 |
Unidentified |
On |
Power is on |
|
LED3 |
Unidentified |
Blinking |
Modem is transmitting or receiving data |
|
LED3 |
Unidentified |
Off |
Power is off |
|
SUPPORTED STANDARD COMMANDS |
|
Basic AT Commands |
|
+++, comma, A/ |
|
A, D, E, H, L, M, N, Q, V, W, X, Y, Z |
|
&C, &D, &F, &G, &K, &L, &M, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z |
|
Extended AT Commands |
|
\A, \B, \C, \G, \J, \K, \N, \Q, \T, \V, \X |
|
%A, %C, %E, %G |
|
Special AT Commands |
|
-C, "H, -J, -K, "N, "O |
|
S-Registers |
|
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S25, S26 |
|
S27, S30, S95 |
Note: See MHI help file for complete information. |
Proprietary AT Command Set
See GLOBAL VILLAGE COMMUNICATIONS TELEPORT 33.6 INTERNET for a full command summary.