Card Type

ISDN TA

Chip Set

Unidentified

ISDN Rate

128Kbps

ISDN Modulation Protocol

V.110, V.120

Error Correction/Compression

V.42bis

Data Bus

PCMCIA

USER CONFIGURABLE SETTINGS

Setting

Label

Position

í Transmission channel in high impedence mode

J2

Open

Transmit termination set to 100Ohm

J2

Closed

í Receive channel in high impedence mode

J3

Open

Receive termination set to 100Ohm

J3

Closed

Note: Jumpers located inside external line interface

SUPPORTED COMMAND SET

Basic AT Commands

AT, A/

A, E, Q, V, W

&C, &R, &Z

S Registers

S3, S4, S12, S25, S26

Note: See MHI Help File for full command documentation.