DIAMOND MULTIMEDIA SYSTEMS, INC.
SUPRASONIC 288 V+
Card Type |
Fax, Modem (synchronous/asynchronous), Voice |
Chip Set |
Rockwell |
Maximum Data Rate |
28.8Kbps |
Maximum Fax Rate |
14.4Kbps |
Data Bus |
External |
Fax Class |
Class I & II |
Data Modulation Protocol |
Bell 103/212A ITU-T V.21, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell V.FC |
Fax Modulation Protocol |
ITU-T V.17, V.21, V.21CH2, V.27ter, V.29 |
Error Correction/Compression |
MNP5, MNP10, V.42, V.42bis |
CONNECTIONS | ||||||
Function |
Label |
Function |
Label | |||
Line out/in - Unidentified |
CN1 |
DC power |
CN4 | |||
Line in/out - Unidentified |
CN2 |
Power switch |
SW1 | |||
RS-232/422 |
CN3 |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
RD |
Red |
On |
Modem is receiving data |
RD |
Red |
Off |
Modem is not receiving data |
SD |
Red |
On |
Modem is transmitting data |
SD |
Red |
Off |
Modem is not transmitting data |
SUPPORTED COMMAND SET |
Basic AT Commands |
AT, +++, comma, A/ |
A, C, D, E, F, H, L, N, O, P, Q, R, S, T, U, V, W, Y, Z |
&A, &B, &C, &G, &J, &K, &L, &P, &S, &T, &V, &W, &X, &Y, &Z |
Extended AT Commands |
\C, \E, \O, \Q, \T, \U, \V, \X, \Y, \Z |
%A, %TT |
S Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25, S26, |
S38, S46, S48, S82, S86, S90, S91, S92, S95, S99, S108, S109, S110 |
Special Commands |
"H, "N, "O,-J, )M, +MS? |
Note: See MHI Help File for full command documentation. |
Proprietary AT Command Set
See document SUPRAFAX MODEM 288I for a full command summary.