CALPAK CORPORATION
MX-2496
|
Modem Type |
Data (synchronous/asynchronous)/Fax |
|
Maximum Data Rate |
2400bps |
|
Maximum Fax Rate |
9600bps |
|
Data Bus |
8-bit ISA |
|
Fax Class |
Unidentified |
|
Data Modulation Protocol |
Unidentified |
|
Fax Modulation Protocol |
ITU-T V.21CH2, V.27ter, V.29 |
|
Error Correction/Compression |
MNP5, V.42, V.42bis |
|
CONNECTIONS | |||
|
Purpose |
Location |
Purpose |
Location |
|
Line out |
CN1 |
Line in |
CN2 |
|
BASE I/O ADDRESS SELECTION | ||||
|
Port |
SW1/A |
SW1/C |
SW1/E |
SW1/F |
| COM1: (3F8h) |
Off |
On |
Off |
On |
| COM2: (2F8h) |
On |
Off |
Off |
On |
| COM3: (3E8h) |
Off |
On |
On |
Off |
| COM4: (2E8h) |
On |
Off |
On |
Off |
|
INTERRUPT SELECTION | |||
|
IRQ |
SW/B |
SW1/D |
JP1 |
| 3 |
On |
Off |
Pins 2 & 4 closed |
| 4 |
Off |
On |
Pins 2 & 4 closed |
| 5 |
Off |
Off |
Pins 3 & 4 closed |
| 7 |
Off |
Off |
Pins 1 & 2 closed |
|
Note: Location of JP1 is unidentified. | |||
Proprietary AT Command Set
See document V1558 for a full command summary.