IPTools.net.ua

Card Type

Fax, Modem (asynchronous)

Chip Set

Unidentified

Maximum Data Rate

33.6Kbps

Maximum Fax Rate

14.4Kbps

Data Bus

PCMCIA Type II

Fax Class

Class I & II

Data Modulation Protocol

ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34

Fax Modulation Protocol

ITU-T V.17, V.21CH2, V.27ter, V.29

Error Correction/Compression

MNP5, V.42, V.42bis

SUPPORTED COMMAND SET

Basic AT Commands

AT, A/

A, E, H, V, W, Z

&D, &F, &W

S Registers

S0, S6, S7, S8

Note: Please see MHI Help file for full command documentation.

DIAL

Type:

Immediate

Format:

AT [cmds] D<#> [cmds]

Description:

Dials telephone number according to any modifiers included in the string

Note:

Any combination of modifiers can be used to produce the desired dial functions in sequence.

Modifier

Function

T

Tone dialing enabled

P

Pulse dialing enabled

,

Dialing paused for amount of time specified in S8 register

W

Dialing resumed following dial tone detection

SPEAKER VOLUME

Type:

Configuration

Format:

AT [cmds] Ln [cmds]

Description:

Controls speaker volume

Command

Function

L0

Speaker volume disabled

í L2

Speaker volume enabled

SPEAKER MODE

Type:

Configuration

Format:

AT [cmds] Mn [cmds]

Description:

Selects various speaker options

Command

Function

M0

Speaker disabled

í M1

Speaker enabled until carrier signal detected, off for transmission

M2

Speaker enabled

DATA CARRIER DETECT (DCD)

Type:

Configuration

Format:

AT [cmds] &Cn [cmds]

Description:

Selects whether the DCD option is enabled or disabled

Command

Function

&C1

DCD enabled after carrier signal detected

MISCELLANEOUS TECHNICAL NOTES

The PCMCIA fax/modem requires an analog RJ-11 telephone line. A PBX or digital phone line may damage the PCMCIA fax/modem or telephone equipment.