ADC KENTROX
DATASMART MAX E1/FE1 MODEL 72521
|
Card Type |
E1 CSU/DSU |
|
Chipset |
Unidentified |
|
E1 Transfer Rate |
2.048Mbps |
|
E1 Protocol |
Unidentified |
|
Frame Type |
Unidentified |
|
Data Bus |
Serial |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
PREVIOUS button |
BT1 |
V.24 DCE serial control port |
CN5 |
|
NEXT button |
BT2 |
V.24 DTE serial control port |
CN6 |
|
ESCAPE button |
BT3 |
RS-449, V.35, V.36, or X.21 serial data port 1 |
CN7 |
|
SELECT button |
BT4 |
RS-449, V.35, V.36, or X.21 serial data port 2 |
CN8 |
|
Monitor receive port |
CN1 |
AC power in |
CN9 |
|
Monitor transmit port |
CN2 |
LCD display |
LCD |
|
E1 line out (network interface) |
CN3 |
PCMCIA slot |
SL1 |
|
RS-422 auxiliary clock port |
CN4 | ||
|
Note:Standard RS-449, V.35 and X.21 serial ports are available on included adapter cables. | |||
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
TXD |
Yellow |
On |
Data port indicated by LED1-2 is receiving data from network |
|
TXD |
Yellow |
Off |
Data port indicated by LED1-2 is not receiving data from network |
|
RXD |
Yellow |
On |
Data port indicated by LED1-2 is transmitting data to network |
|
RXD |
Yellow |
Off |
Data port indicated by LED1-2 is not transmitting data to network |
|
CTS |
Yellow |
On |
Data port indicated by LED1-2 CTS is high |
|
CTS |
Yellow |
Off |
Data port indicated by LED1-2 CTS is low |
|
RTS |
Yellow |
On |
Data port indicated by LED1-2 RTS is high |
|
RTS |
Yellow |
Off |
Data port indicated by LED1-2 RTS is low |
|
DIAGNOSTIC LED(S) (CONT) | |||
|
LED |
Color |
Status |
Condition |
|
1 |
Yellow |
On |
TXD, RXD, CTS, and RTS LEDs indicate status of data port 1 |
|
1 |
Yellow |
Blinking |
Loss of Signal detected on data port 1 |
|
1 |
Yellow |
Off |
TXD, RXD, CTS, and RTS LEDs do not indicate status of data port 1 |
|
2 |
Yellow |
On |
TXD, RXD, CTS, and RTS LEDs indicate status of data port 2 |
|
2 |
Yellow |
Blinking |
Loss of Signal detected on data port 2 |
|
2 |
Yellow |
Off |
TXD, RXD, CTS, and RTS LEDs do not indicate status of data port 2 |
|
DATA |
Green |
On |
Valid data signal detected on E1 network interface |
|
DATA |
Green |
Off |
No valid signal detected on E1 network interface, E1 signal is out of synchronization, All Ones Signal detected, Bit Error Rate is greater than 10 -3 , or TS16 framing pattern has been lost |
|
RED |
Red |
On |
Loss Of Signal condition detected on E1 network interface |
|
RED |
Red |
Slow blink |
Alarm Indication Signal condition detected |
|
RED |
Red |
Fast blink |
E1 network signal is out of frame synchronization |
|
RED |
Red |
Off |
No red alarm conditions detected |
|
YEL |
Yellow |
On |
Remote Loss Of Signal or out of frame synchronization condition detected |
|
YEL |
Yellow |
Off |
No remote Loss Of Signal or out of frame synchronization condition detected |
|
TEST |
Yellow |
On |
Local loopback test in progress |
|
TEST |
Yellow |
Blinking |
Test code, remote loopback, or Bit Error Rate Test in progress |
|
TEST |
Yellow |
Off |
No tests are in progress |
|
PWR |
Green |
On |
Power is on |
|
PWR |
Red |
On |
Self-test failed |
|
PWR |
Green |
Blinking |
User is logged in |
|
PWR |
Alternating green/red |
Blinking |
Downloading software |
|
PWR |
N/A |
Off |
Power is off |