BANKSIA TECHNOLOGY PTY, LTD.
PRO 34
Card Type |
Fax, Modem (synchronous/asynchronous) |
Chip Set |
Unidentified |
Maximum Data Rate |
28.8Kbps |
Maximum Fax Rate |
14.4Kbps |
Data Bus |
External |
Fax Class |
Class I & II |
Data Modulation Protocol |
Bell 103/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 |
Fax Modulation Protocol |
ITU-T V.17, V.27ter, V.29 |
Error Correction/Compression |
MNP5, MNP10, V.42, V.42bis |
CONNECTIONS | ||||||
Function |
Label |
Function |
Label | |||
Auxiliary port |
CN1 |
DC power |
CN4 | |||
Line out |
CN2 |
Power switch |
SW1 | |||
RS-232/422 |
CN3 |
USER CONFIGURABLE SETTINGS | ||
Setting |
Label |
Position |
í DTR signal ignored |
SW1/1 |
On |
DTR signal normal |
SW1/1 |
Off |
í DCD and DSR forced high |
SW1/2 |
On |
DCD and DSR normal |
SW1/2 |
Off |
í Echo disabled |
SW1/3 |
On |
Echo enabled |
SW1/3 |
Off |
í Result codes disabled |
SW1/4 |
On |
Result codes enabled |
SW1/4 |
Off |
í Leased-line operation |
SW1/5 |
On |
Switched line operation |
SW1/5 |
Off |
í Auto-answer enabled on 2nd ring |
SW1/6 |
On |
Auto-answer disabled on 2 nd ring |
SW1/6 |
Off |
í Synchronous mode 2 enabled |
SW1/7 |
On |
Synchronous mode 2 disabled |
SW1/7 |
Off |
í Dumb mode |
SW1/8 |
On |
Smart mode |
SW1/8 |
Off |
í Flow control to XON/XOFF enabled |
SW2/1 |
On |
Flow control to XON/XOFF disabled |
SW2/1 |
Off |
í V.25bis command set synchronous HDLC (NRZI) enabled |
SW2/2 |
On |
V.25bis command set synchronous HDLC (NRZI) disabled |
SW2/2 |
Off |
í Factory configured - DO NOT ALTER |
SW2/5 |
Unidentified |
í Factory configured - DO NOT ALTER |
SW2/6 |
Unidentified |
í Factory configured - DO NOT ALTER |
SW2/7 |
Unidentified |
í Factory defaults loaded up on power-up |
SW2/8 |
On |
Do not force factory defaults on power-up |
SW2/8 |
Off |
AUXILIARY PORT | ||||
Setting |
LK1 |
LK2 |
LK3 |
LK4 |
í PSTN |
Pins 2 & 3 closed |
Pins 1 & 2 closed |
Open |
Closed |
Leased-line |
Pins 1 & 2 closed |
Pins 2 & 3 closed |
Open |
Open |
AUXILIARY PORT - CONTINUED | |||||
Setting |
LK5 |
LK6 |
LK7 |
LK8 |
LK9 |
í PSTN |
Closed |
Closed |
Open |
Closed |
Open |
Leased-line |
Closed |
Open |
Closed |
Closed |
Closed |
MODULATION SELECTION | ||
Setting |
SW2/3 |
SW2/4 |
factory/stored setting |
Off |
Off |
28800 carrier |
Off |
On |
14400 carrier |
On |
Off |
2400 carrier |
On |
On |
SUPPORTED COMMAND SET |
Basic AT Commands |
AT, Comma |
A, B, E, H, L, M, N, O, P, Q, S, T, V, W, X, Y, Z |
&C, &D, &G, &L, &R, &S, &V, &W, &X, &Y, &Z |
Extended AT Commands |
\B, \G, \J, \V, \Y, \Z |
Special Commands |
*H, )M |
S Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S25, S26, S36, S37, S38 |
Note: See MHI Help file for full command documentation. |
Proprietary AT Command Set
For a full command summary, see BANKSIA TECHNOLOGY PTY, LTD., PRO 144.