IPTool.net.ua IPTools.net.ua

MULTI-FUNCTION ETHERNET+MODEM/FAX (EN2218-2)

ACCTON TECHNOLOGY CORPORATION

MULTI-FUNCTION ETHERNET+MODEM/FAX (EN2218-2)

Card Type

Modem (synchronous/asynchronous), Ethernet

Chipset

Unidentified

Maximum Onboard Memory

32KB DRAM/128KB Flash RAM

Network Transfer Rate

10Mbps

Maximum Data Rate

14.4Kbps

Maximum Fax Rate

14.4Kbps

Data Bus

PCMCIA Type II

Fax Class

Class I

Data Modulation

Bell 103A/212A

ITU-T V.21, V.22, V.23, V.22bis, V.32, V.32bis

Fax Modulation

ITU-T V.17, V.21CH2, V.27ter, V.29

Error Correction/Compression

MNP5, MNP10, V.42, V.42bis

Topology

Linear Bus/Star

Wire Type

Unshielded twisted pair

RG-58A/U 50ohm coaxial

Boot ROM

Not available

CONNECTIONS

Function

Label

Function

Label

MAU connector

CN1

Unshielded twisted pair connector

CN3

RG-58A/U 50ohm coaxial connector

CN2

Telephone line out

CN4

DIAGNOSTIC LED(S)

LED

Color

Status

Condition

LINK

Green

On

Network connection is good

LINK

Green

Off

Network connection is broken

OH

Green

On

Modem is off-hook

OH

Green

Off

Modem is on-hook

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, comma, A/

A, B, C, D, E, H, I, M, N, O, P, Q, T, V, W, X, Y, Z

&C, &D, &F, &G, &K, &M, &P, &Q, &R, &S, &T, &V, &W, &X

Extended AT Commands

\K, \N

%C, %E, %L, %Q

S-Registers

S0, S6, S7, S8

Note: See MHI documentation for complete descriptions.

Proprietary AT Command Set

PROTOCOL/SPEED

Type:

Configuration

Format:

AT [cmds] Fn [cmds]

Description:

Selects the protocol and speed the modem will attempt to connect at.

Command

Function

F0

Auto-detect the highest common connect speed.

F1

Select V.21 or Bell 103 at 300bps speed.

F3

Select V.23 at 75/1200bps speed.

F4

Select V.22 or Bell 212A at 1200bps speed.

F5

Select V.22bis at 2400bps speed.

F6

Select V.32/V.32bis at 4800bps speed.

F7

Select V.32bis at 7200bps speed.

F8

Select V.32/V.32bis at 9600bps speed.

F9

Select V.32bis at 12Kbps speed.

F10

Select V.32bis at 14.4Kbps speed