BOCA RESEARCH, INC.
ON-LINE EXPRESS V.34 (FDSP34AI)
|
Modem Type |
Data (asynchronous)/Fax/Voice |
|
Maximum Data Rate |
28.8Kbps |
|
Maximum Fax Rate |
14.4Kbps |
|
Data Bus |
8 bit ISA |
|
Fax Class |
Class I |
|
Data Modulation Protocol |
AT&T V.32terbo Bell 103A/212A ITU-T V.21, V.22bis, V.23, V.32, V.32bis, V.34 |
|
Fax Modulation Protocol |
ITU-T V.17, V.21CH2, V.27ter, V.29 |
|
Error Correction/Compression |
MNP5, V.42, V.42bis |
|
CONNECTIONS | |||
|
Purpose |
Location |
Purpose |
Location |
|
Line in |
CN1 |
Microphone |
CN3 |
|
Line out |
CN2 |
Speaker |
CN4 |
| SERIAL PORT ADDRESS | ||||
|
Setting |
JP1/E |
JP1/F |
JP1/G |
JP1/H |
|
COM1 (3F8h) |
Closed |
Open |
Open |
Open |
| COM2 (2F8h) |
Open |
Closed |
Open |
Open |
|
COM3 (3E8h) |
Open |
Open |
Closed |
Open |
|
COM4 (2E8h) |
Open |
Open |
Open |
Closed |
|
INTERRUPT | ||||
|
Setting |
JP1/A |
JP1/B |
JP1/C |
JP1/D |
| 3 |
Closed |
Open |
Open |
Open |
|
4 |
Open |
Closed |
Open |
Open |
|
5 |
Open |
Open |
Closed |
Open |
|
7 |
Open |
Open |
Open |
Closed |
Proprietary AT Command Set
|
AUTO FALLBACK CHARACTER | |
|
Type: |
Register |
|
Format: |
AT [cmds] S43=n [cmds] |
|
Default: |
13 |
|
Range: |
0 - 127 |
|
Unit: |
ASCII |
|
Description: |
Set auto fallback character during MNP negotiation |
|
AUTO-RELIABLE FALLBACK CHARACTER | |
|
Type: |
Configuration |
|
Format: |
AT [cmds] %An [cmds] |
|
Default: |
Unidentified |
|
Range: |
0-127 |
|
Unit: |
ASCII |
|
Description: |
Sets the character used as the auto-reliable fallback character |
|
AUTO SLEEP TIMER | |
|
Format |
AT [cmds] S46=n [cmds] |
|
Default: |
255 |
|
Range: |
0 - 255 |
|
Unit: |
100 ms |
|
Description: |
Maximum duration of DTE and DCE inactivity allowed prior to initiating low-power sleep mode |
|
AUTO-RELIABLE TIME BUFFER CONFIGURATION | |
|
Type: |
Register |
|
Format: |
AT [cmds] S48=n [cmds] |
|
Description: |
Controls the handling of incoming data during auto-reliable time period |
|
Command |
Function |
| S48=0 |
Data is discarded |
|
S48=1 |
Data is buffered |
|
S48=2 |
Data is discarded, modem returns to normal mode on receiving auto-reliable fallback character |
|
BREAK SEND | |
|
Type: |
Immediate |
|
Format: |
AT [cmds] \Bn [cmds] |
|
Range: |
0-9 |
|
Unit: |
.1 second |
|
Description: |
Sends break to modem |
|
BREAK TYPE | |||||
|
Type: |
Configuration | ||||
|
Format: |
AT [cmds] \Kn [cmds] | ||||
|
Description: |
Configures action of break signal | ||||
|
Command |
Break from DTE Reliable/Normal mode |
Break from DTE Direct mode |
Modem receives \B |
Break from remote modem | |
|
\K0 |
Enter command mode, do not send break to remote modem |
Send break to remote modem immediately, then enter command mode |
Buffers cleared and break sent to remote modem |
Buffers cleared and break sent to DTE | |
|
\K1 |
Buffers cleared and break sent to remote modem |
Send break to remote modem immediately |
Buffers cleared and break sent to remote modem |
Buffers cleared and break sent to DTE | |
|
\K2 |
Enter command mode, do not send break to remote modem |
Send break to remote modem immediately, then enter command mode |
Send break to remote modem immediately |
Send break to DTE immediately | |
|
\K3 |
Send break to remote modem immediately |
Send break to remote modem immediately |
Send break to remote modem immediately |
Send break to DTE immediately | |
|
\K4 |
Enter command mode, do not send break to remote modem |
Send break to remote modem immediately, then enter command mode |
Send break to remote modem with transmitted data |
Break sent with received data to the DTE | |
|
\K5 |
Send break with transmitted data |
Send break to remote modem immediately |
Send break to remote modem with transmitted data |
Break sent with received data to the DTE | |
|
COMPRESSION | |
|
Format |
AT [cmds] S59=n [cmds] |
|
Default: |
1 |
|
Range: |
0 - 1 |
|
Description: |
Selects MNP5 status |
|
Command |
Function |
|
S53=0 |
Data compression disabled |
|
S53=1 |
Data compression enabled |
|
COMPRESSION | |
|
Type: |
Configuration |
|
Format: |
AT %Cn |
|
Description: |
Selects data compression |
|
Command |
Function |
|
%C0 |
Data compression disabled |
| %C1 |
Data compression enabled |
|
CONNECT MODE | |
|
Type: |
Configuration |
|
Format: |
AT [cmds] S53=n [cmds] |
|
Description: |
Sets connect mode |
|
Command |
Function |
|
S53=0 |
Normal mode enabled |
|
S53=1 |
Reliable mode enabled |
|
S53=2 |
Auto-reliable mode enabled |
| S53=3 |
LAPM, MNP or normal mode enabled |
|
S53=4 |
LAPM or MNP mode enabled |
|
DTE RATE STATUS | |
|
Type: |
Register |
|
Format: |
AT [cmds] S62=n [cmds] |
|
Description: |
Selects DTE rate |
|
Command |
Function |
|
0 |
300 bps |
|
1 |
600 bps |
|
2 |
1200 bps |
|
3 |
2400 bps |
|
4 |
4800 bps |
|
5 |
7200 bps |
|
6 |
9600 bps |
|
7 |
12Kbps |
|
8 |
14.4Kbps |
|
9 |
16.8Kbps |
|
10 |
19.2Kbps |
|
11 |
21.6Kbps |
|
12 |
24.0Kbps |
|
13 |
26.4Kbps |
|
14 |
28.8Kbps |
|
15 |
38.4Kbps |
| 16 |
57.6Kbps |
|
17 |
115.2Kbps |
|
DTE SPEED OPTION | |
|
Type: |
Immediate |
|
Format: |
AT [cmds] \Jn [cmds] |
|
Description: |
Controls the speed of the DTE |
|
Command |
Function |
|
\J0 |
DCE and DTE rates are independent |
|
FAX/DATA MODE | |
|
Type: |
Register |
|
Format: |
AT [cmds] S50=n [cmds] |
|
Description: |
Choose data or FAX mode |
|
Command |
Function |
| 0 |
Data mode enabled |
|
1 |
FAX mode enabled |
|
FLOW CONTROL | |
|
Type: |
Configuration |
|
Format: |
AT [cmds] \Gn [cmds] |
|
Description: |
Selects modem port flow control |
|
Command |
Function |
|
\G0 |
Flow control disabled |
|
\G1 |
Flow control enabled |
|
FLOW CONTROL TYPE | |
|
Type: |
Configuration |
|
Format: |
AT [cmds] \Qn [cmds] |
|
Description: |
Sets type of flow control used by modem |
|
Command |
Function |
|
\Q0 |
Flow control disabled |
|
\Q1 |
XON/XOFF flow control enabled |
|
\Q2 |
Returns ERROR |
| \Q3 |
RTS/CTS flow control enabled |
|
INACTIVITY TIMER | |
|
Type: |
Register |
|
Format: |
AT [cmds] \Tn [cmds] |
|
Default: |
0 |
|
Range: |
0-90 |
|
Unit: |
Minutes |
|
Description: |
Sets the length of time that the modem does not receive information before it disconnects |
|
PROTOCOL | |
|
Type: |
Configuration |
|
Format: |
AT [cmds] \Nn [cmds] |
|
Description: |
Sets connect mode |
|
Command |
Function |
|
\N0 |
Normal mode enabled |
|
\N1 |
Direct mode enabled |
|
\N2 |
MNP reliable mode enabled |
| \N3 |
MNP, LAP-M, or normal mode enabled |
|
\N4 |
LAP-M or MNP reliable enabled |
|
EXTENDED RESULT CODES | |
|
Type: |
Configuration |
|
Format: |
AT [cmds] \Vn [cmds] |
|
Example: |
AT \V1 %C1 <CR> |
|
Description: |
Selects extended result codes |
| Command |
Function |
| \V0 |
Extended result codes disabled |
| \V1 |
Extended result codes enabled |
|
PROTOCOL/SPEED | |
|
Format |
AT [cmds] S37=n [cmds] |
|
Default: |
0 |
|
Range: |
0-17 |
|
Description: |
Selects switched line speed |
| Command |
Function |
| S37=0 |
Connect at last AT speed |
|
S37=3 |
Connect at V.22 1200bps |
|
S37=6 |
Connect at V.22bis 2400bps |
|
S37=7 |
Connect at V.23 4800bps |
|
S37=8 |
Connect at V.32/V.32bis 4800bps |
|
S37=9 |
Connect at V.32/V.32bis 9600bps |
|
S37=10 |
Connect at V.32bis 12.0Kbps |
|
S37=11 |
Connect at V.32bis 14.4Kbps |
|
S37=12 |
Connect at V.34 16.8Kbps |
|
S37=13 |
Connect at V.34 19.2Kbps |
|
S37=14 |
Connect at V.34 21.6Kbps |
|
S37=15 |
Connect at V.34 24.0Kbps |
|
S37=16 |
Connect at V.34 26.4Kbps |
|
S37=17 |
Connect at V.34 28.8Kbps |
|
RESULT CODES | |
|
Type: |
Configuration |
|
Format: |
AT [cmds] S41=n [cmds] |
|
Description: |
Selects extended result codes |
|
Command |
Function |
| S41=0 |
Display DTE speed |
|
S41=1 |
Display carrier, protocol and compression |
|
S41=2 |
Display DCE speed |
|
V42bis COMPRESSION | |
|
Type: |
Configuration |
|
Format: |
AT [cmds] "Hn [cmds] |
|
Description: |
Controls V.42bis compression |
|
Command |
Function |
|
"H0 |
V.42bis disabled |
|
"H1 |
V.42bis while transmit enabled |
|
"H2 |
Returns ERROR |
| "H3 |
V.42bis during transmitting and receiving enabled |
|
V.32 RETRAIN | |
|
Type: |
Register |
|
Format: |
AT [cmds] S42=n [cmds] |
|
Range: |
0 - 2 |
|
Unit: |
Bit-mapped |
|
Description: |
Selects action the modem will take during bad line quality on V.32/32bis connection |
|
Command |
Function |
| S42=0 |
Auto-retrain disabled, hang up |
|
S42=1 |
Auto-retrain on line quality problem enabled |
|
S42=2 |
Modem ignores line quality problems |
|
XON/XOFF PASS-THROUGH | |
|
Type: |
Configuration |
|
Format: |
AT [cmds] \Xn [cmds] |
|
Description: |
Selects whether XON/XOFF signals are sent to remote modem |
|
Command |
Function |
| \X0 |
XON/XOFF signals trapped by local modem |
| \X1 |
XON/XOFF passed through local modem |