TOSHIBA
TXM3401E1 (SCSI SWITCH)
|
Device Type |
CD-ROM |
|
Interface |
SCSI (2) |
|
Size |
238 x 70 x 222mm |
|
Spin Rate |
1x, 2x |
|
Formats Supported |
CD-XA, CD-I Ready, CD Bridge, Photo CD, Red book, Yellow book |
|
View |
Top |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
Audio out - left channel |
CN1 |
Audio out - right channel |
CN2 |
|
MISCELLANEOUS TECHNICAL NOTES |
|
The SCSI ID switch (SW) is used to select the drive ID. The number in the window corresponds to the selected SCSI ID. To change the SCSI ID, press the "+" or "-" lever for higher or lower number. After the "7" ID there are 2 blank spots, the first is for "Play audio CD" mode, the second is not used at this time. To change SCSI ID turn power off/on for the change to take effect. |