SONY CORPORATION
SDT-2000, SDT-4000
|
Device Type |
Tape Drive |
|
Interface |
SCSI-2 |
|
Format |
DDS, DDS-DC, DCLZ |
|
Sustained Transfer Rate |
183 KBPS (SDT-2000) 183-366 KBPS (SDT-4000) |
|
Size |
3.5 in. half height |
|
View |
Top |
|
USER CONFIGURABLE SETTINGS | |||
|
Setting |
Label |
Position | |
|
Data compression disabled |
JP1/Pins 7 & 8 |
Closed | |
|
Data compression enabled |
JP1/Pins 7 & 8 |
Open | |
|
Parity enabled |
JP1/Pins 9 & 10 |
Closed | |
|
Parity disabled |
JP1/Pins 9 & 10 |
Open | |
|
Factory configured - do not alter. |
JP1/Pins 11 & 12 |
Unidentified | |
|
Terminator enabled |
JP1/Pins 13 & 14 |
Closed | |
|
Terminator disabled |
JP1/Pins 13 & 14 |
Open | |
|
DRIVE SELECT ID | |||
|
Drive ID |
JP1/Pins 1 & 2 |
JP1/Pins 3 & 4 |
JP1/Pins 5 & 6 |
|
0 |
Open |
Open |
Open |
|
1 |
Open |
Open |
Closed |
|
2 |
Open |
Closed |
Open |
|
3 |
Open |
Closed |
Closed |
|
4 |
Closed |
Open |
Open |
|
5 |
Closed |
Open |
Closed |
|
6 |
Closed |
Closed |
Open |
|
7 |
Closed |
Closed |
Closed |
|
TERMINATION POWER SELECTION | ||
|
Setting |
JP1/Pins 15 & 16 | |
|
TERMPWR supplied by drive |
Closed | |
|
TERMPWR supplied by SCSI interface to drive |
Open | |
|
MANUFACTURERS RECOMMENED MEDIA | |||
|
Drive |
Tape |
Capacity Without Compression |
Capacity With Compression |
|
SDT-2000 |
DDS 90 meter |
2.0 GB |
Unidentified |
|
SDT-4000 |
DDS (DCLZ) 90 meter |
2.0-4.0 GB |
4.0-8.0 GB |
|
DIAGNOSTIC LED(S) | |||||
|
LEDs |
Functions | ||||
|
LED1 |
LED2 |
LED3 |
Activity |
Cartridge |
Other |
|
Off |
Off |
Off |
None |
None |
None |
|
On |
Off |
Off |
SCSI |
None |
None |
|
Flashing 1 |
Flashing 1 |
Off |
Loading/Unloading |
None | |
|
Flashing 1 |
Flashing 1 |
On |
Loading/Unloading |
Write Protected | |
|
Off |
On |
Flashing 1 |
None |
Loaded |
Cleaning Tape at EOM |
|
Off |
On |
Off |
None |
Loaded |
None |
|
On |
On |
Off |
SCSI |
Loaded |
None |
|
Flashing 1 |
On |
Off |
SCSI/Drive |
Loaded |
None |
|
Unidentified |
On |
On |
X |
Loaded |
Write Protected |
|
Unidentified |
Flashing 2 |
Unidentified |
X |
Loaded |
Error Rate Warning |
|
Flashing 2 |
Unidentified |
Unidentified |
X |
X |
Humidity Warning |
|
Unidentified |
Unidentified |
Flashing 2 |
X |
X |
Cleaning Request |
|
Unidentified |
Unidentified |
Flashing 3 |
X |
X |
Drive Mechanism Failure |
|
Unidentified |
Unidentified |
Flashing 4 |
X |
X |
Drive Circuitry Failure |
|
Flashing 3 |
Unidentified |
Unidentified |
X |
X |
Waiting for Reset |
|
Unidentified |
Flashing 3 |
Unidentified |
X |
X |
Waiting for Eject |
|
Note: 1 LED flashes at 0.25 seconds on/0.25 seconds off. 2 LED flashes at 3.5 seconds on/0.25 seconds off. 3 LED emits a continuous pulse at 0.25 seconds on. 4 LED emits a continuous double pulse at 0.25 seconds on. X means not applicable. | |||||