PROXIM, INC.
RANGELAN2 (7910, 7911)
|
Card Type |
Network Interface Card |
|
NIC Type |
Ethernet |
|
Boot ROM |
Not available |
|
Network Transfer Rate |
1.6Mbps |
|
Topology |
Point-to-point, Point-to-multipoint, Infrastructure |
|
Wiring Type |
RS-232 serial |
|
Maximum Modem Rate |
115200bps |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
Antenna connector |
CN1 |
DC power connector |
CN3 |
|
RS-232 (DB-9) connector |
CN2 | ||
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
LED1 |
Yellow |
On |
Station type and domain set by software |
|
LED1 |
Yellow |
Off |
Station type and domain set by switches |
|
LED2 |
Green |
Off |
Non-functioning LED - reserved for future use |
|
LED3 |
Green |
On |
Operating as a master |
|
LED3 |
Green |
Off |
Not operating as a master |
|
LED4 |
Yellow |
On |
Operating as a station |
|
LED4 |
Yellow |
Off |
Not operating as a station |
|
LED5 |
Green |
On |
Operating in normal mode |
|
LED5 |
Yellow |
On |
Initializing hardware |
|
LED5 |
Red |
On |
Problem with hardware |
|
LED6 |
Yellow |
Blinking |
Data is being received wirelessly |
|
LED6 |
Yellow |
Off |
Data is not being received wirelessly |
|
LED7 |
Green |
Blinking |
Data is being received on serial connection |
|
LED7 |
Green |
Off |
Data is not being received on serial connection |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
Station mode |
SW2 |
Station | |
|
Master mode |
SW2 |
Master | |
|
DOMAIN SELECTION | |||
|
Setting |
Label |
Position | |
|
Use domain 0 |
SW1 |
0 | |
|
Use domain 1 |
SW1 |
1 | |
|
Use domain 2 |
SW1 |
2 | |
|
Use domain 3 |
SW1 |
3 | |
|
Use domain 4 |
SW1 |
4 | |
|
Use domain 5 |
SW1 |
5 | |
|
Use domain 6 |
SW1 |
6 | |
|
Use domain 7 |
SW1 |
7 | |
|
Use domain 8 |
SW1 |
8 | |
|
Configuration menu |
SW1 |
9 | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
Model 7910 operates at 100 mW. Model 7911 operates at 500 mW. |