PUREDATA
PDE8023-32CT
NIC Type |
Ethernet |
Network Transfer Rate |
10Mbps |
Data Bus |
32-bit EISA |
Topology |
Linear Bus, Star |
Wiring Type |
Unshielded twisted pair RG-58A/U 50ohm coaxial |
Boot ROM |
Available |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
RJ-45/10BASE-T connector |
RG-58A/U 50ohm coaxial/10BASE2 connector |
CN2 |
WIRING TYPE SELECTION | ||||
Setting |
JP2/A |
JP2/B |
JP2/C |
JP2/D |
Software selectable |
Closed |
Open |
Open |
Open |
10BASE-T |
Open |
Closed |
Open |
Open |
10BASE5 |
Open |
Open |
Closed |
Open |
10BASE2 |
Open |
Open |
Open |
Closed |
CARD SELECTION | |||||
Setting |
JP1/A |
JP1/B |
JP1/C |
JP1/D | |
1 |
Closed |
Open |
Open |
Open | |
2 |
Open |
Closed |
Open |
Open | |
3 |
Open |
Open |
Closed |
Open | |
4 |
Open |
Open |
Open |
Closed |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
LED 1 |
Red |
On |
Network collision detected |
LED 1 |
Red |
Off |
Network collision not detected |
LED 2 |
Green |
On |
Link integrity is good |
LED 2 |
Green |
Off |
Link integrity is broken |
LED 3/4 |
Green |
On |
Adapter receiving data |
LED 3/4 |
Green |
Off |
Adapter not receiving data |
LED 3/4 |
Red |
On |
Adapter communicating with host |
LED 3/4 |
Red |
Off |
Adapter not communicating |