PURE DATA, LTD.
PDI508PLUS-F
NIC Type |
ARCnet |
Transfer Rate |
2.5Mbps |
Data Bus |
8-bit ISA |
Topology |
Linear Bus |
Wiring Type |
200 m fiber optic cable |
Boot ROM |
Available |
CONNECTIONS |
|
Purpose |
Location |
SMA 905 Receive Connector (gray) |
CN1 |
SMA 905 Transmit Connector (black) |
CN2 |
CONFIGURATION MEMORY CLEAR |
||
Setting |
JP1 |
|
|
Normal operation |
Open |
|
Clear memory of all addresses and settings |
Closed |
INTERRUPT REQUEST |
||||
IRQ |
JP2A |
JP2B |
JP2C |
|
|
5 |
Closed |
Open |
Open |
|
6 |
Open |
Closed |
Open |
|
7 |
Open |
Open |
Closed |
TIMEOUT CONFIGURATION |
||||
Response Time |
Reconfiguration Time |
JP3 |
JP4 |
|
|
74.7s |
840s |
Open |
Open |
|
283.4s |
1680s |
Open |
Closed |
|
561.8s |
1680s |
Closed |
Open |
|
1118.6s |
1680s |
Closed |
Closed |
CARDS INSTALLED |
|||||
Card number |
JP5A |
JP5B |
JP5C |
JP5D |
|
|
1 |
Open |
Open |
Open |
Closed |
|
2 |
Open |
Open |
Closed |
Open |
|
3 |
Open |
Closed |
Open |
Open |
|
4 |
Closed |
Open |
Open |
Open |
Note:If there is only one NIC installed in a system, set this option to the "1" position. If this NIC is the second card to be installed in the system, set this option to the "2" position, and so on. |
DIAGNOSTIC LED(S) |
|||
LED |
Color |
Status |
Condition |
LED1 |
Red |
On/Blinking |
I/O bus activity detected |
LED1 |
Red |
Off |
No I/O bus activity detected |
LED2 |
Green |
On |
Network activity detected |
LED2 |
Green |
Off |
No network activity detected or bad connection |
MISCELLANEOUS NOTES |
Software that is supplied with the card must be run in order to fully configure the card. |