LANTECH COMPUTER COMPANY
EN2000 PNP/COMBO
|
Card Type |
Network Interface Card |
|
NIC Type |
Ethernet |
|
Boot ROM |
Available |
|
Network Transfer Rate |
10Mbps (half-duplex), 20Mbps (full-duplex) |
|
Topology |
Linear Bus, Star |
|
Wiring Type |
Unshielded twisted pair AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial |
|
Data Bus |
16-bit ISA |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
RJ-45 UTP connector |
CN1 |
RG-58A/U BNC connector |
CN3 |
|
AUI transceiver via DB-15 |
CN2 | ||
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
LK |
Unidentified |
On |
UTP link is good |
|
LK |
Unidentified |
Off |
UTP link is broken |
|
TX |
Unidentified |
Blinking |
Data is being transmitted |
|
TX |
Unidentified |
Off |
Data is not being transmitted |
|
RX |
Unidentified |
Blinking |
Data is being received |
|
RX |
Unidentified |
Off |
Data is not being received |
|
COL |
Unidentified |
Blinking |
Collision detected on network |
|
COL |
Unidentified |
Off |
No collision detected on network |