LANCAST
6221-01
|
Card Type |
Transceiver |
|
NIC Type |
Ethernet |
|
Network Transfer Rate |
100Mbps |
|
Topology |
Star |
|
Wiring Type |
Fiber optic cable (2), Media Independent Interface (MII) |
|
Data Bus |
External |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
40-pin MII interface |
CN1 |
Fiber optic SC connector - transmit |
CN3 |
|
Fiber optic SC connector - receive |
CN2 | ||
|
USER CONFIGURABLE SETTINGS | ||
|
Function |
Label |
Position |
|
Half-Duplex mode |
SW1/1 |
On |
|
Full-Duplex mode |
SW1/1 |
Off |
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
PWR |
Unidentified |
On |
Power is being received from the DTE device |
|
PWR |
Unidentified |
Off |
Power is not being received from the DTE device |
|
LNK |
Unidentified |
On |
Link is good |
|
LNK |
Unidentified |
Off |
Link is broken |
|
TX |
Unidentified |
Blinking |
Data is being transmitted |
|
TX |
Unidentified |
Off |
Data is not being transmitted |
|
RX |
Unidentified |
Blinking |
Data is being received |
|
RX |
Unidentified |
Off |
Data is not being received |
|
COL |
Unidentified |
On |
Collision detected on network |
|
COL |
Unidentified |
Off |
No collision detected on network |
|
MISCELLANEOUS TECHNICAL NOTES |
|
SW1/2 - 4 control the PHY settings. The exact configuration information is unavailable. |