LANCAST
6111-02
|
Card Type |
Network Interface Card |
|
NIC Type |
Ethernet |
|
Maximum Onboard Memory |
6KB |
|
Boot ROM |
Not available |
|
Network Transfer Rate |
100Mbps (200Mbps full duplex) |
|
Topology |
Star |
|
Wiring Type |
Fiber optic cable |
|
Data Bus |
32-bit PCI |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
Fiber optic ST connector - transmit |
CN1 |
Fiber optic ST connector - receive |
CN2 |
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
LINK |
Green |
On |
Network connection is good |
|
LINK |
Red |
On |
Network connection is broken |
|
RX |
Yellow |
Blinking |
Data is being received |
|
RX |
Yellow |
Off |
Data is not being received |
|
TX |
Green |
Blinking |
Data is being transmitted |
|
TX |
Green |
Off |
Data is not being transmitted |
|
Note:With both the TX & RX LEDs lit up, the card is either using full-duplex mode or there is a data collision present. | |||