IBM CORPORATION
IBM PCJR CLUSTER ADAPTER
NIC Type |
Unidentified |
Network Transfer Rate |
Unidentified |
Data Bus |
PCjr expansion bus |
Topology |
Linear Bus |
Wire Type |
RG-59B/U 75ohm coaxial |
Boot ROM |
Available (location unidentified) |
CONNECTIONS | |
Function |
Label |
RG-59B/U 75ohm coaxial connector |
CN1 |
USER CONFIGURABLE SETTINGS | |||
Setting |
Label |
Position | |
Factory configured - do not alter |
SW1/7 |
Off | |
Boot ROM enabled |
SW1/8 |
On | |
Boot ROM disabled |
SW1/8 |
Off |
NODE ADDRESS | ||||||
Setting |
SW1/1 |
SW1/2 |
SW1/3 |
SW1/4 |
SW1/5 |
SW1/6 |
0 |
Off |
Off |
Off |
Off |
Off |
Off |
1 |
On |
Off |
Off |
Off |
Off |
Off |
2 |
Off |
On |
Off |
Off |
Off |
Off |
3 |
On |
On |
Off |
Off |
Off |
Off |
4 |
Off |
Off |
On |
Off |
Off |
Off |
59 |
On |
On |
Off |
On |
On |
On |
60 |
Off |
Off |
On |
On |
On |
On |
61 |
On |
Off |
On |
On |
On |
On |
62 |
Off |
On |
On |
On |
On |
On |
63 |
On |
On |
On |
On |
On |
On |
Note: A total of 64 node address settings are available. The switches are a binary representation of the decimal node addresses. SW1/6 is the Most Significant Bit and switch SW1/1 is the Least Significant Bit. The switches have the following decimal values: SW1/6=32, SW1/5=16, SW1/4=8, SW1/3=4, SW1/2=2, SW1/1=1. Turn on the switches and add the values of the switches that are on to obtain the correct node ID. (Off=0, On=1) |