LANCAST
ENC-4105
NIC Type |
Ethernet |
Transfer Rate |
10Mbps |
Data Bus |
8-bit ISA |
Topology |
Star Linear bus |
Wiring Type |
Unshielded twisted pair RG-58A/U 50ohm coaxial AUI transceiver via DB-15 port |
Boot ROM |
Available |
BOOT ROM | ||
Setting |
W1 | |
Disabled |
Open | |
Enabled |
Closed |
BOOT ROM & I/O BASE ADDRESS | ||||
Boot ROM Address |
I/O Address |
W2 |
W3 | |
C8000h |
300 - 31Fh |
Closed |
Closed | |
CC000h |
320 - 33Fh |
Open |
Closed | |
D0000h |
340 - 35Fh |
Closed |
Open | |
D4000h |
360 - 37Fh |
Open |
Open |
INTERRUPT REQUEST | |||||
IRQ |
W4 |
W5 |
W6 |
W7 | |
2 |
Open |
Open |
Open |
Closed | |
3 |
Closed |
Open |
Open |
Open | |
4 |
Open |
Closed |
Open |
Open | |
5 |
Open |
Open |
Closed |
Open |
CABLE TYPE | |||
Type |
W8 |
W9 | |
RG-58A/U 50ohm coaxial |
Pins 1 & 2 closed |
Pins 1 & 2 closed | |
AUI transceiver via DB-15 port |
Pins 2 & 3 closed |
Pins 1 & 2 closed | |
Unshielded twisted pair |
Pins 2 & 3 closed |
Pins 2 & 3 closed |
LINK INTEGRITY TEST | ||
Setting |
W10 | |
Enabled |
Pins 1 & 2 closed | |
Disabled |
Pins 2 & 3 closed | |
Note:The link integrity test is only valid when the cable type is unshielded twisted pair. |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
LED1 |
Green |
On |
Twisted pair network connection is good |
LED1 |
Green |
Off |
Twisted pair network connection is broken |
LED2 |
Green |
On |
Data is being transmitted |
LED2 |
Red |
On |
Data is being received |
LED2 |
N/A |
Off |
Data is not being transmitted or received |
Note:LED2 is a two color LED. |