GARRETT COMMUNICATIONS
MAGNUM TP1
|
Card Type |
Ethernet Transceiver |
|
NIC Type |
Ethernet |
|
Maximum Onboard Memory |
Unidentified |
|
Boot ROM |
Not available |
|
Network Transfer Rate |
10Mbps |
|
Topology |
Linear Bus, Star |
|
Wiring Type |
Shielded twisted pair, Unshielded twisted pair AUI transceiver via DB-15 port |
|
Data Bus |
External |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
AUI transceiver via DB-15 |
CN1 |
UTP/STP connector (RJ-45) |
CN2 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
Automatic correction for reversed polarity enabled |
SW1 |
On | |
|
Automatic correction for reversed polarity disabled |
SW1 |
Off | |
|
Unshielded twisted pair |
SW2 |
Off | |
|
Shielded twisted pair |
SW2 |
On | |
|
10BASE-T enabled |
SW3 |
On | |
|
Starlan 10 (ATT) polarity on the segment |
SW3 |
Off | |
|
SQE enabled |
SW4 |
On | |
|
SQE disabled |
SW4 |
Off | |
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
LED1 |
Green |
On |
Network connection established |
|
LED1 |
Green |
Off |
Network connection is not established |
|
LED2 |
Yellow |
On |
Collision has occurred |
|
LED2 |
Yellow |
Off |
Collision has not occurred |
|
LED3 |
Green |
Blinking |
Data is being received |
|
LED3 |
Green |
Off |
Data is not being received |
|
LED4 |
Green |
On |
Data is being transmitted |
|
LED4 |
Green |
Off |
Data is not being transmitted |
|
LED5 |
Yellow |
On |
Polarity error |
|
LED5 |
Yellow |
Off |
No polarity error |
|
LED6 |
Yellow |
On |
SQE test feature enabled |
|
LED6 |
Yellow |
Off |
SQE test feature disabled |
|
LED7 |
Green |
On |
Power is on |
|
LED7 |
Green |
Off |
Power is off |
|
MISCELLANEOUS TECHNICAL NOTES |
|
The AUI port should be directly connected to the workstation. If you cannot connect to the workstation, an AUI drop cable (which cannot exceed 3 feet in length) may be used. |