GARRETT COMMUNICATIONS
MAGNUM CT1
|
Card Type |
Ethernet Transceiver |
|
NIC Type |
Ethernet |
|
Maximum Onboard Memory |
Unidentified |
|
Boot ROM |
Not available |
|
Network Transfer Rate |
10Mbps |
|
Topology |
Linear Bus |
|
Wiring Type |
AUI transceiver via DB-15 port, RG-58A/U 50ohm coaxial |
|
Data Bus |
External |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
AUI transceiver via DB-15 |
CN1 |
RG-58A/U 50ohm coaxial |
CN2 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
SQE enabled |
SW1 |
On | |
|
SQE disabled |
SW1 |
Off | |
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
LED1 |
Green |
On |
Power is on |
|
LED1 |
Green |
Off |
Power is off |
|
LED2 |
Yellow |
On |
SQE is enabled |
|
LED2 |
Yellow |
Off |
SQE is disabled |
|
MISCELLANEOUS TECHNICAL NOTES |
|
The AUI port should be directly connected to the workstation. If you cannot connect directly to the workstation, an AUI drop cable (which cannot exceed 3 feet in length) may be used. |