EICON TECHNOLOGY CORPORATION
EICONCARD P92
|
Card Type |
Network Interface Card |
|
NIC Type |
Ethernet |
|
Maximum Onboard Memory |
512KB DRAM |
|
Boot ROM |
Not available |
|
Network Transfer Rate |
2Mbps |
|
Topology |
Star |
|
Wiring Type |
VHSI (Very High-Speed Interface) high density cable |
|
Data Modulation Protocol |
V.24, V.35, EIA-530, V.36,/RS-449, OR X.21 |
|
Data Bus |
32-bit PCI |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
36-pin VHSI port |
CN1 |
36-pin VHSI port |
CN2 |
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
LED1 |
Unidentified |
On |
Network connection is good |
|
LED1 |
Unidentified |
Rapid Blinking |
Network connection not yet established |
|
LED1 |
Unidentified |
Slow Blinking |
Network connection interrupted |
|
LED1 |
Unidentified |
Off |
Network connection is broken |
|
LED2 |
Unidentified |
On |
Network connection is good |
|
LED2 |
Unidentified |
Rapid Blinking |
Network connection not yet established |
|
LED2 |
Unidentified |
Slow Blinking |
Network connection interrupted |
|
LED2 |
Unidentified |
Off |
Network connection is broken |