GVC TECHNOLOGIES, INC.
NIC-2000T
NIC Type |
Ethernet |
Transfer Rate |
10Mbps |
Data Bus |
16-bit ISA |
Topology |
Star |
Wiring Type |
Shielded/Unshielded twisted pair AUI transceiver via DB-15 port |
Boot ROM |
Available |
BOOT ROM | ||
Setting |
W1 | |
Disabled |
Open | |
Enabled |
Closed |
I/O BASE ADDRESS AND BOOT ROM ADDRESS | ||||
I/O Address |
Boot ROM Address |
W2 |
W3 | |
300-31Fh |
C8000-CBFFFh |
Closed |
Closed | |
320-33Fh |
CC000-CFFFFh |
Open |
Closed | |
340-35Fh |
D0000-D3FFFh |
Closed |
Open | |
360-37Fh |
D4000-D7FFFh |
Open |
Open |
EXTENDED WAIT STATE | ||
Setting |
W4 | |
Disabled |
Open | |
Enabled |
Closed | |
Note:Some cards require more wait states in the I/O cycle. If you are having difficulties booting, try enabling the
|
INTERRUPT REQUEST | |||||
IRQ |
W5 |
W6 |
W7 |
W8 | |
2/9 |
Open |
Open |
Open |
Closed | |
3 |
Closed |
Open |
Open |
Open | |
4 |
Open |
Closed |
Open |
Open | |
5 |
Open |
Open |
Closed |
Open |
CABLE TYPE | ||
Type |
W9 | |
Shielded/Unshielded twisted pair |
Pins 2 & 3 closed | |
AUI transceiver via DB-15 port |
Pins 1 & 2 closed |
LINK INTEGRITY TEST | ||
Setting |
W10 | |
Enabled |
Pins 1 & 2 closed | |
Disabled |
Pins 2 & 3 closed |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
LED1 |
Green |
On |
Twisted pair network connection is good |
LED1 |
Green |
Off |
Twisted pair network connection is broken |
LED2 |
Red |
On |
Polarity is correct |
LED2 |
Red |
Off |
Polarity is reversed and corrected |
LED3 |
Yellow |
Blinking |
Data is being transmitted |
LED3 |
Yellow |
On |
Data is not being transmitted |
LED3 |
Yellow |
Off |
Card is not receiving power or is malfuntioning |
LED4 |
Red |
Blinking |
Data is being received |
LED4 |
Red |
On |
Data is not being received |
LED4 |
Red |
Off |
Card is not receiving power or is malfuntioning |
Note:When Link Integrity is disabled, LED1 will remain off. This does not indicate a faulty connection. |