GATEWAY COMMUNICATIONS, INC.
G/ETHERTWIST MC ADAPTER
|
NIC Type |
Ethernet |
|
Transfer Rate |
10Mbps |
|
Data Bus |
16-bit MCA |
|
Topology |
Star |
|
Wiring Type |
Shielded/Unshielded twisted pair AUI transceiver via DB-15 port |
|
LINK INTEGRITY TEST | ||
|
Setting |
JP31 | |
|
Enabled |
Pins 1 & 2 Closed | |
|
Disabled |
Pins 2 & 3 Closed | |
|
Note:Link Integrity is only used with 10Base-T wiring. When using an AUI transciever, the test should be disabled. | ||
|
CABLE TYPE SELECT | ||
|
Type |
JP1 | |
|
Shielded/Unshielded twisted pair |
Pins 1 & 2 Closed | |
|
AUI transceiver via DB-15 port |
Pins 2 & 3 Closed | |
|
DIAGNOSTIC LED(S) | |
|
Status |
Condition |
|
Jabber LED (1) on (Red) |
Adapter is continually sending random data |
|
Link test LED (2) on (Green) |
Network connection good |
|
Link test LED (2) blinks (Green) |
Wiring error, disabled test jumper |
|
Transmit LED (3) blinks (Red) |
Data is being transmitted |
|
Receive LED (4) blinks (Red) |
Data is being received |
|
MISCELLANEOUS NOTES |
|
Different drivers must be used for the National & the Fujitsu chipset cards, & are not interchangeable. Fujitsu adapters may be used for either 8 or 16 bit Fujitsu cards. While the National chipset cards require a different driver for an 8 or 16 bit card. |