COMPU-SHACK PRODUCTION, GMBH
CS-FDDI PCI-UTP-SAS
|
Card Type |
Network Interface Card |
|
NIC Type |
FDDI |
|
Maximum Onboard Memory |
Unidentified |
|
Boot ROM |
Available |
|
Network Transfer Rate |
100Mbps |
|
Topology |
Star |
|
Wiring Type |
Unshielded twisted pair |
|
Data Bus |
32-bit PCI |
|
CONNECTIONS | |
|
Function |
Label |
|
UTP connector |
CN1 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
Boot ROM disabled |
JP13/A |
Open | |
|
Boot ROM enabled |
JP13/A |
Closed | |
|
Factory configured - do not alter |
JP13/E |
Unidentified | |
|
Factory configured - do not alter |
JP3 |
Unidentified | |
|
BASE I/O ADDRESS SELECTION | ||||
|
Address |
JP13/B |
JP13/C |
JP13/D | |
|
200h-21Fh |
Closed |
Closed |
Closed | |
|
220h-23Fh |
Closed |
Closed |
Open | |
|
240h-25Fh |
Closed |
Open |
Closed | |
|
280h-29Fh |
Closed |
Open |
Open | |
|
300h-31Fh |
Open |
Closed |
Closed | |
|
320h-33Fh |
Open |
Closed |
Open | |
|
340h-35Fh |
Open |
Open |
Closed | |
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
LED1 |
Unidentified |
On |
See conditions in note below |
|
LED1 |
Unidentified |
Off |
See conditions in note below |
|
LED2 |
Red |
On |
Polarity reversed |
|
LED2 |
Red |
Off |
Polarity normal |
|
LED3 |
Yellow |
On |
Data is being transmitted/received |
|
LED3 |
Yellow |
Off |
Data is not being transmitted/received |
|
LED4 |
Green |
On |
Network connection is good |
|
LED4 |
Green |
Off |
Network connection is broken |
|
Note: LED1 varies depending on model. Green (On: UTP link is good, Off: UTP link is broken); Red (On: Illegal connection, Off: Valid connection); or Orange (On: Line error alarm activated, Off: Line error alarm not activated). | |||
|
DAUGHTER BOARD USER CONFIGURABLE SETTINGS |
|
Note: JP14 and JP16 are unidentified. |