DIGITAL EQUIPMENT CORPORATION
UTP SAS CONTROLLER (DEFPA-UA),
UTP SAS ADAPTER (DEFPA-UB)
|
Card Type |
Network Interface Card |
|
NIC Type |
FDDI |
|
Maximum Onboard Memory |
Unidentified |
|
Boot ROM |
Unidentified |
|
Network Transfer Rate |
100Mbps |
|
Topology |
Star |
|
Wiring Type |
Unshielded twisted pair |
|
Data Bus |
32-bit PCI |
|
CONNECTIONS | |
|
Function |
Label |
|
UTP connector |
CN1 |
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
LED1 |
Green |
On |
Network connection is good |
|
LED1 |
Green |
Blinking |
Network connection in progress |
|
LED1 |
Green |
Off |
Network connection is broken |
|
LED1 |
Red |
On |
See Note |
|
LED1 |
Red |
Blinking |
Illegal topology |
|
LED1 |
Red |
Off |
Network connection is broken |
|
Note: If LED1 is on after system boots, indicates broken port or Link Confidence Test (LCT) failure; retry loop. If on before system boots, indicates self-test failure. | |||