DANPEX CORPORATION (ADI SYSTEMS, INC.)
Aquila AQ-NE/2TP (MCA)
|
NIC Type |
Ethernet |
|
Transfer Rate |
10Mbps |
|
Data Bus |
16-bit MCA |
|
Topology |
Star |
|
Wiring Type |
Unshielded twisted pair AUI Transceiver via DB-15 port |
|
Boot ROM |
Available |
|
LINK INTEGRITY TEST | ||
|
Setting |
JP31 | |
|
Enabled |
Pins 1 & 2 Closed | |
|
Disabled |
Pins 2 & 3 Closed | |
|
Note:Link Integrity is only used with 10Base-T wiring. When using an AUI transciever, the test should be disabled. | ||
|
CABLE TYPE | ||
|
Type |
JP2A - JP2I | |
|
Unshielded twisted pair |
Pins 2 & 3 Closed | |
|
AUI transceiver via DB-15 port |
Pins 1 & 2 Closed | |
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
LED1 |
Green |
On |
Twisted pair network connection is good |
|
LED1 |
Green |
Off |
Twisted pair network connection is broken |
|
LED2 |
Yellow |
Blinking |
Data is being transmitted or received |
|
LED2 |
Yellow |
Off |
Data is not being transmitted or received |
|
LED3 |
Red |
On |
Collision detected on network |
|
LED3 |
Red |
Off |
Normal operation |
|
LED4 |
Green |
Blinking |
Data is being received |
|
LED4 |
Green |
Off |
Data is not being received |