BREEZECOM
SA-10 PRO.11
|
Card Type |
Network Interface Card |
|
NIC Type |
Ethernet |
|
Boot ROM |
Not available |
|
Radio Data Rate |
3Mbps |
|
Network Transfer Rate |
2Mbps |
|
Topology |
Ad-hoc, infrastructure |
|
Wiring Type |
Unshielded twisted pair |
|
Data Bus |
External |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
RJ-45 UTP connector |
CN1 |
DC power connector |
CN3 |
|
Monitor connector |
CN2 | ||
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
LED1 |
Unidentified |
On |
Power is on |
|
LED1 |
Unidentified |
Off |
Power is off |
|
LED2 |
Unidentified |
On |
Connected to access point |
|
LED2 |
Unidentified |
Off |
Not connected to access point |
|
LED3 |
Unidentified |
On |
Data is being transmitted |
|
LED3 |
Unidentified |
Off |
Data is not being transmitted |
|
LED4 |
Unidentified |
On |
High quality reception |
|
LED4 |
Unidentified |
Off |
Poor reception |
|
LED5 |
Unidentified |
On |
Medium quality reception |
|
LED5 |
Unidentified |
Off |
Poor reception |
|
LED6 |
Unidentified |
On |
Low quality reception |
|
LED6 |
Unidentified |
Off |
Very low quality reception |
|
MISCELLANEOUS TECHNICAL NOTES |
|
Unit may have two pre-installed antenna, or configured with two connectors for external antenna. |