ADDTRON TECHNOLOGY CO., LTD.
ET-10T1B
|
Device Type |
Transceiver |
|
NIC Type |
Ethernet |
|
Maximum Onboard Memory |
Unidentified |
|
Boot ROM |
Not available |
|
Network Transfer Rate |
10Mbps |
|
Topology |
Star |
|
Wiring Type |
Unshielded twisted pair |
|
Data Bus |
External |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
AUI transceiver via DB-15 |
CN1 |
RJ-45 UTP connector |
CN2 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
SQE test function enabled |
SW1/1 |
On | |
|
SQE test function disabled |
SW1/1 |
Off | |
|
Link beat enabled |
SW1/2 |
On | |
|
Link beat disabled |
SW1/2 |
Off | |
|
Note: Disable link beat in networks incompatible with 10BaseT standard | |||
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
PWR |
Unidentified |
On |
Power is on |
|
PWR |
Unidentified |
Off |
Power is off |
|
RX |
Unidentified |
Blinking |
Data is being received |
|
RX |
Unidentified |
On |
Heavy LAN traffic load |
|
RX |
Unidentified |
Off |
Data is not being received |
|
TX |
Unidentified |
Blinking |
Data is being transmitted |
|
TX |
Unidentified |
On |
Large data is being transmitted |
|
TX |
Unidentified |
Off |
Data is not being transmitted |
|
LNK |
Unidentified |
On |
Network connection is good |
|
LNK |
Unidentified |
Off |
Network connection is broken |
|
COL |
Unidentified |
Blinking |
Collision detected on network |
|
COL |
Unidentified |
Off |
Collision not detected on network |
|
COL |
Unidentified |
On |
Possible error occurred |