ACCTON TCHNOLOGY CORPORATION
ETHERDUO PCMCIA
|
Card Type |
Network Interface Card |
|
NIC Type |
Ethernet |
|
Maximum Onboard Memory |
16KB |
|
Boot ROM |
Unidentified |
|
Network Transfer Rate |
10Mbps |
|
Topology |
Linear Bus, Star |
|
Wiring Type |
Unshielded twisted pair RG-58A/U 50ohm coaxial |
|
Data Bus |
PCMCIA |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
RG-58A/U connector |
CN1 |
15-pin flat connector |
CN3 |
|
RJ-45 connector |
CN2 | ||
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
Tx/Rx |
Green |
On |
Data is being transmitted/received |
|
Tx/Rx |
Green |
Off |
Data is not being transmitted/received |
|
LINK |
Green |
On |
UTP link is good |
|
LINK |
Green |
Off |
UTP link is broken |
|
Note: Exact locations of LEDs are unidentified. | |||
|
MISCELLANEOUS TECHNICAL NOTES |
|
Note: The ferrite bead should be clamped over the module cable as close as possible to 15-pin flat connector. |