ANCOR COMMUNICATIONS, INC.
FCS 266 SBUS, FCS 1062 SBUS
|
NIC Type |
Fiber Channel |
|
Processor |
Intel i960 |
|
Processor Speed |
33MHz |
|
Chipset |
Ancor Communications VHSCI 4 |
|
Maximum Onboard Memory |
1MB VRAM/512KB SRAM/256KB Flash ROM/128KB ROM |
|
Network Transfer Rate |
265.6125Mbps (FCS 266 SBUS) 1062.5Mbps (FCS 1062 SBUS) |
|
Data Bus |
SBus |
|
Topology |
Star/Peer-Peer |
|
Wire Type |
Fiber optic cable |
|
Boot ROM |
Not available |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
Receive fiber optic SC connector |
CN1 |
Transmit fiber optic SC connector |
CN2 |
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
LED1 |
Unidentified |
On |
Card is receiving data |
|
LED1 |
Unidentified |
Off |
Card is not receiving data |
|
LED2 |
Unidentified |
On |
Card is transmitting data |
|
LED2 |
Unidentified |
Off |
Card is not transmitting data |
|
LED3 |
Green |
Blinking |
Normal operation |
|
LED3 |
Green |
1 blinks |
EPROM failed checksum test |
|
LED3 |
Green |
2 blinks |
Processor memory failed self-test |
|
LED3 |
Green |
3 blinks |
Buffer memory failed self-test |
|
LED3 |
Green |
4 blinks |
FPGA failed self-test |
|
LED3 |
Green |
5 blinks |
Flash ROM failed checksum test |
|
LED3 |
Green |
6 blinks |
Flash ROM ID failed self-test |
|
LED3 |
Green |
7 blinks |
OLC loopback test failed |
|
LED3 |
Green |
8 blinks |
Chipset register failed self-test |
|
LED3 |
Green |
9 blinks |
Timer failed self-test |
|
LED3 |
Green |
Off |
Power is off or processor is not functioning |